Just use a yellow butt connector. Its ok if its too big. You can just double the end of the wire over to make for a snug fit. Or you can use a blue one, just trim some of the wire strands. I wouldn...
That is a bit of a stretch. I emailed them and they are assembled by hand by US folks here in this country but from parts sourced from all over the world.
I really enjoyed it gentleman. I did 4 sessions wish I had stayed out more but I was making sure my brakes would get me home.
Ben I enjoyed our time on track that challenger and Porsche were fly...
no he would modify his topfeed de rail that he stated he had with new mounting tabs to go to a ve intake manifold to use his 1000cc topfeed injectors he already has .
Unless I'm looking at the wrong rails, his rails are totally custom. According to boostednx, you can somehow modify your stock sidefeed rail to work as a topfeed with some easy fab work and common ...
I have no problem with a buyer trying to get a better price. Nor do I have a problem with a seller sticking to his original price. Anyone with half a brain though, will do the negotiation in privat...
You're fine switching both solenoids at the same time. With dyno time you may be able to smooth the transition out by switching them independently, but most people switch 'em both at the same RPM. ...
You should be able to hear the cams switch over while driving. An easy way to test would be to adjust the MSD down to 2,000 rpm or so, and manually rev the engine while under the hood. You can also...
None of them are available through nissan anymore which is why I contacted javier about fabing some up. Just an FYI for everyone. Mine were non existent on my b13 so I can't wait to get these and p...
Thanks to Joe for setting this up and hounding me to go...LOL...and everyone else for scaring the shit out of me in the braking zones....LOL
I cant remember having more...
LE-R needs SR swap and stickier tires. It was a drag race down the back straight with GA16DE power against a NB Miata and a BMW 2002ti LOL.
Joe forgot I'm not SR power and pointed me by, took hal...
Why didn't you just grab some cheapy auto parts 5 mm wheel spacers?? They can't be more than $20/4 and would probably save you time in itself just swapping those in.
we got Larry's track brakes on and bedded in...fluid swapped for Motul.
Changed the engine and tranny oil and spark plugs....cranked up the AGxs
removed the Nitrous bottle,and still need to remove ...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top