x2 on what Kyle said. Don't forget the p10 has independent rear suspension, where the p11 has a beam. As for plugin OBDII emissions testing with e DET swap in a p11, I think you're ok on a 99 ecu...
Probably the more important thing to figure out is whether you actually prefer the P10 or P11 chassis. The OBD2 will not make a huge difference in the DET swap. But also, if you prefe...
Yeah I guess it just boils down to this; Its a gtir oil pump, the pulley I have doesn't fit over it so its not a gtir pulley. So what I need is a pulley that fits over the gtir oil pump, which....w...
Super late update... I found the problem. Not sure how I didn't notice it when I took my old TOB out but there was this wear on the clips, and it is there on the old one too. I'm not sure why I tho...
I think a lot of the posts in this thread are coming from a place of frustration. And justifiably so. Lots of rehashing of things that have been discussed for the last 4-5 years with regards to the...
So after figuring what latency for the 800cc injectors, I inputted them into Nismotronic and alas, the car still wouldn't idle. So with this, I sent John my file and low and behold, I was ...
As someone who has organized a convention, I feel like I can add to this thread. Back in 2003, we were scheduled to use a track in OK (forgot the name), but either the owner or the track went bank...
It is a shame that 2015 will not have a track day, but 2016 definitely can. Start putting real plans together if you think you're up to the task of hosting in 2016, I'll be accepting proposals in ...
You will absolutely need to increase the latency as fuel pressure rises. If you are trying to use the OEM latency values at 4 bar and the modified injector, ...
For the past three trepidatious months, we (my wife and I) have been praying and waiting for two things. One has happened already. The first ultrasound. The baby is bouncing ar...
I would look at the Z33 trans as that is what is also used in the Frontiers and Xterras. The Z32 I cannot speak on but I would think since the Z33 was used in SUV/Truck applications the shifter wou...
Found some time to take the roughed out parts and grind them to fit. Afterwards, they received a light polish and cleaning. Then the welder was fired up to tack it all together. Up next is the bell...