BenFenner's Likes Given

seat belts not attached to the doors.

Yes, I see that now.. Only so many places to get a good price on tires mount/balanced around here for the GF's car so nothing special just the basics..

Anyway went there and they will fix no que...

The engine/flywheel numbers are just estimates based on % entered by dyno operator...So they mean nothing at all.

Thanks Obama

Try to use the upper most coolant hose has the hot water exit on the turbo and lower line as the cold in, so when the car is shut down the water will naturally flow upward


edit:
http://turbobyga...

OK, I found that ground, it's in a different spot then you aer mentioning. on the B15 it goes from the trans to the body right under the fuse box. I pulled that and will be making a new one today....

Recovered, hooray. Stripped. fawk. Good luck.

CAR HAS BEEN RECOVERED missing 3 wheels (thanks to wheel locks) steering wheel, seat, hood, and battery (according to person I spoke with over phone) on my way to the sheriffs now, haven't seen the...

Everytime I'm at a track with FIA style curbs?

Re: Want a Quaife HLSD?

If these are std pin height pistons then you'll need a shortened rod. . I guess you didn't really specify on the list

With the larger studs and step deck head there should be absolutely no sealing issues. Not to mention the fact that with the extra bore you'll be making more power with lower boost pressures ......

I'd say bore all day. Your going to retain the ability to rev high. Your actually going to increase the flow of the head by having the larger diameter, putting the valves further from the cylinder ...

I think that nobody on here has reached the limits of a 2.0 setup so why move on and spend the extra money on a strokes setup when you can make 1000hp on a 2.0.

allow me...you want the lobe pointing away from the rocker, then slide your feeler gauge in between. if the lobe is pointing toward the rocker you will have zero clearance.

0.009" in & 0.013" ex is what Charles & I have been using for years on Nissan cams.

You will be fine + or - 0.002" from there.

Actually between cam and rocker!!

figured it out, only one ball. The other balls I saw are for the reverse control which I did not take out. I didn't look carefully in the FSM. Saw the other spring where the longer rod goes and no ...

Fortunately, I was able to return them and got a full refund. New regular hoses from Napa are now in place. And I just want to say how awesome my new cooling system is. New koyo, two 12" puller ...

coach found the OEM connector to use with that harness Coil Interface Connector(Harness Side)


Wiring Specialties

They also make their own S15 coilpack harness. SR20DET PRO Coilpack Wiring H...

P10 Chassis Suspension :: Fortune Auto 500 Series Gen 4

Figured out yesterday (finally!). It turns out that when I had the engine harness done back in 2005, that the people who did it had the ECU, o2 Sensor, and two other wires all powered off of one sw...

0w-30 German Castrol both VVL cars I had. I'm also a really big fan of Amsoil.

Also another thumbs down for Mobil 1. I've heard they have changed it again but when they changed the formula in 07-...

1968?

woohoo another beam thread!