Thread: Water lines Pictures

Anyone have pictures the way set up their water lines feed/return? I'm doing t25 oil/water cooled.

I'm planning to do the throttle bottle but I need some pics to know where to start, tia

Do you have a DE or DET?... With a DET you can use the stock feed location with banjo setup.

sorry forgot to mention..

de + t 9:5

I just did mine. The small hose that runs from upper radiator hose, right after therm housing, to the throttle body. I sent the end from upper rad hose to the turbo then from the turbo on other side back to the throttle body. Basically sent the coolant to the turbo first, then back to throttle body. So everything is stock except the re-route to the turbo first. Had car all fired up and bled system, all is good. Can feel hoses get warm so I know coolant is running through them just fine. Hope that helps ya out.

Try to use the upper most coolant hose has the hot water exit on the turbo and lower line as the cold in, so when the car is shut down the water will naturally flow upward


edit:

Thx guys, but anyone by chance at has pics, please do so and post them up

bumo

Ill be under my ride today ill post one

Tap into this line with a three way and you should be fine