Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: HowTo - P10/P11 SR20VE Coil On Plug w/ 20V Crank Angle Sensor

+ Reply To Thread
Posts: 41-50 of 63
2013-07-10 16:36:34
#41
it was $46
2013-07-10 19:20:54
#42
Originally Posted by unijabnx2000
it was $46


Updated, thanks!
2013-07-10 19:31:05
#43
@coach found the OEM connector to use with that harness Coil Interface Connector(Harness Side)


@Wiring Specialties

They also make their own S15 coilpack harness. SR20DET PRO Coilpack Wiring Harness | Wiring Specialties

----------

@Scrildo Made this just for you man.

Last edited by unijabnx2000 on 2013-07-10 at 20-16-35.
2013-07-10 19:44:47
#44
Originally Posted by unijabnx2000
@coach found the OEM connector to use with that harness Coil Interface Connector(Harness Side)


@Wiring Specialties

They also make their own S15 coilpack harness. SR20DET PRO Coilpack Wiring Harness | Wiring Specialties

----------

@Scrildo Made this just for you man.



Is this an AEM V1 or AEM V2 box? Let me know so I can post this in the 1st post .

And I did see those harnesses/clips, I didn't use them for my build but I can certainly update the first page.
2013-07-10 19:51:08
#45
B13 Both versions 30-1600 & 30-6600
2013-07-10 20:03:31
#46
Originally Posted by unijabnx2000
B13 Both versions 30-1600 & 30-6600


Updated first post! Thank you sir!
2013-07-11 15:43:38
#47
Originally Posted by unijabnx2000
B13 Both versions 30-1600 & 30-6600


Those numbers are small in the pic.

They are Pin #'s:

Pin 1 - Coil 1
Pin 7 - Coil 2
Pin 5 - Coil 3
Pin 25 - Coil 4

The S15 coil pack harness plus that plug connector make the install MUCH easier.

Brent
2013-08-19 17:18:33
#48
Updated the CAS connector part number you can now buy everything from http://wiringspecialties.com, that site rocks...
2014-06-17 01:05:11
#49
If using the stock ECU, would there be any tuning necessary after switching to the coils and CAS, or would it be wire-and-run?

Also, can the IB pins from the coils be wired to the corresponding injector pins on the ECU (101, 110, 103, 112)?

And is an ignitor chip not necessary, such as can be found on the RWD SR's?
Last edited by Matej on 2014-06-17 at 01-14-19.
2014-06-17 01:06:43
#50
No igniter chip needed on smart coils

Sent from my 831C using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top