BenFenner's Likes Given

Re: Convention countdown thread

where is the filter for the maf. they don't run so well with out a filter. As ben stated the bov must be recirculated. I would also do a comp and leak down test for piece of mind.

"The Convention" - New Guy

Cleaning EGR and BPT information taken from se-r.net:

PROBLEM: Surge and hesitation between 1500 and 3000 rpm

Affects: All '91 - '93 SR20DE (Sentra SE-R, NX2000 and G20)


Red arrow: EGR ...

EGR Delete information

[color= COLOR=#FF0000][size= SIZE=7]4 days![/size][/color]

Long pants yes and shorts no. Long sleeve recommended but t-shirts also accepted. M helmets will be ok, but must be 2005 or newer.

Helmets will also be available for rental.

Payment sent: Vadim + 1 guest

I saw a huge improvement on my P11, I already had an Addco rear swaybar too. I'll let you be the judge of original bushing condition:

http://images.rvsmods.com/var/albums/Cars/G20tKH3/Mods/Susp...

I cannot confirm but if I bought ES bushings, and the instructions are specific to the vehicle, I would listen to the instructions. Of all things, measure the diameter of the hole with the inner ri...

Here are some scatter plots of MAP vs. TP and MAP vs. MAF Q. These were made using over 15000 data points collected over a 30 minute drive with varying load, rpm, throttle and speed conditions.

...

The drop off is fairly simple to explain actually and isn't anything you are necessarily doing, it is simply the way TP is calculated and TP will generally start to fall as soon as tq starts to dro...

You know what I think

[url= URL=http://s1103.photobucket.com/user/hpynole/media/NX%20Reclamation/545148_462021860475091_474407695_n.jpg.html][img]http://i1103.photobucket.com/albums/g467/hpynole/N...

? Are we talking about the same TP? I was thinking of Theoretical Pulse-width, not throttle position.

Competition Clutch FWD SR20 Flywheels

http://i50.photobucket.com/albums/f339/MR-4DOOR-SR20DE/SR20%2093%20SE-R%20Extra%20Project%20Stuff/SR20photobucketpics041.jpg

^This is the only pic I have right now of the two. The front sides of...

Yeah and switch back to B13 resplined hubs.
Im not into high numbers.I went overkill on parts just to have a Dependable Race Toy togo down the track and have fun with.
A strong 500HP B13 would be N...

http://www.sr20-forum.com/howto-s/24618-how-crank-pulley-oil-pump-spacer-all-common-combinations-explained.html

Sooooo is this allowed on the forum now or am I missing something?

You are correct, here is the correct image:

http://www.sr20-forum.com/dbtgallery.php?do=gallery_image&id=251&gal=gallery&type=full

This is knock map.

That picture shows the difference between the fully extended B13 arm that Javier makes, and the Stock P10 arm.

In other words, there is a major difference between the B13 and a P10 arms.

From the TurboFX thread http://www.sr20-forum.com/turbofx/46628-adjustable-b13-rear-lcas-gauging-interest-3.html
http://i52.photobucket.com/albums/g28/santies/PART_1322359095635.jpg

read

Ben is just jealous your N/A VE makes more horsepower than his turbo DE. :p