BenFenner's Likes Given

everything else being equal, the heavier fw will travel further because it will have more inertia to dissipate.

Ill bite im bored. Stock flywheel car rolls further. Lightweight flywheel revs up faster and revs down faster also. Thats the benifit of the flywheel is the revving up faster. The negative effect i...

Thanks Ben. I can't believe it's been almost 5 years since I've acquired the vehicle, Slowly buying and piecing together the parts I wanted and soon I'll be able to drive her. I think she is one of...

Keep Your FPR Vacuum Hoses Short!

At last, Fist start up. Been a long time coming. Still lots of little things to do but hope to be driving some time next week!!

https://www.youtube.com/watch?v=W2d4KI_B0ds

One big difference between top feed vs sidefeeds is the increased ability to control latency for bigger flow rates on the top feed vs sidefeed. Essentially, the sidefeeds are much slower to react (...

Thanks for all this info, but I'm pretty sure that I'm just a big dummy.

Since my first B13 had two keys, I assumed that all of them did.
This was reinforced in my mind because when I bought my...

PNW FTW. We may have Fukushima radiation, but we got the best damn OEM B13 paint in all the lands.

Haha, I caught that before it ever ran. Don't know what I was thinking the night I was cutting and threading all of the intake piping...

need a locksmith to disassemble whatever is the least problematic (i.e. if key works for all doors + trunk but not ignition, ignition needs work)

they will disassemble the entire thing, and rear...

OEM only uses one key for everything.

I'm guessing someone replaced your ignition.?

Nice build, but did you really connect the crankcase ventilation to the charge pipe?
http://i.imgur.com/hM0krAA.jpg
That my friend is a big mistake. You are putting the crankcase under some serio...

Maybe looking at a snapshot of the page from when it was working will help.

This is the last one where there was a regional classified link (at least for California).
Web Archive 12-28-12 Californ...

You'll find a much larger selection of B13 friendly 200TW & R-Comp tires in 15" than 16".

Here are a few threads pertaining to wheel clearance with the FastBrakes kits.

http://www.sr20-forum....

I use 16x8 Enkei RPF1 on my B13. Only issue is finding "proper" tire size in 40 series. I run 215/40R16 from Yokohama S-Drive as they are the only ones left in a street tire. You could run a 205...

How about all ads go in classified and they get linked into a regional section based on which state they choose when they fill out the FS template....

I dont even know what the fuss is about.... (not reading all the bickering)

Why are ya'll tryinig to hard to find something that old?

Get back on your short bus. You are throwing insults around and have no clue which way is up. I was the first person to respond... so I'm not jumping on a bandwagon... I'm driving the mother f'er.....

Insults aside, Eggman is correct, you are asking the impossible.


You don't have the budget to do what you want to do. Your goals for your suspension are in direct opposition to each other. ...

Teach me. I am always open to learn.

Alright Alright... I concede Ben ...but I still like having the regional classfieds :)

was there a problem or something that mad benjamin want to change stuff again?

I dont see the need for any changes everything is going smooth around here i thought

i dont really ever see anyone t...

[color= COLOR=#FF0000][size= SIZE=5][b]Forged Madness.[/b][/size] [/color] Expensive, strong, lightweight.



5Zigen Beckets FN-01R Note: There is a FN-01RC version of this wheel that is cast and...

[color= COLOR=#FF0000][size= SIZE=5][b]Flow Formed Wheels[/b][/size][/color]

These excite me.

[url= URL=http://www.savethewheels.org/flow-forming.html]http://www.savethewheels.org/flow-forming.ht...

[color= COLOR=#FF0000][b][size= SIZE=5]Cast Wheels[/size][/b] [/color]with or without additional hardening methods.

[url= URL=http://www.carid.com/images/konig/info/konig-manufacturing.html]http:/...