JKTUNING's Mentions Received

Will you give us the option to purchase these sessions that you record JKTUNING ??

The closest air port is Harrisburg Airport .. and I am almost 100% certain AA does offer flights out of there.

The next closest would be Baltimore, BWI.

We will likely record the sessions, bu...

JKTUNING. Which airport is closest to the shop and does AA fly there?

I have heard of RS Enthalpy before, never used them. I have seen the 240 guys local to me use them. Ever since I had JKTUNING install a NEMU in my car, I am afraid nothing else short of a full stan...

Yepper. I took my bone stock B13 to JKTUNING and he installed a sweet NEMU ECU and tuned that sucker. Huge gains throughout the entire powerband. Huge may seem minor to some of the higher HP folks ...

jktuning

I saw someone flow bench STIs and they only moved 503cc ... Also if you can IMO go with a MAP Sensor.. It too is a 5v sensor like a MAF and you just invert part of your table and it should work fin...

meaning my tune must be shit? granted thats a possibility.. but JKTUNING has seen my tune an many many many logs and helped me out here an there.. i would think if something were wrong he'd have ...

That's the speed limiter. My GTI-R eccu did it also. I got a speed limit defender from HKS and it solved the problem. You can contact John JKTUNING and he can chip your ECU for around the same pric...

Completely off topic but... has anyone noticed what subforum this thread as well as the last Nismotronic thread have been posted in..?
I'd never even seen that vendor...
JKTUNING

dude its like Christmas everytime i see that theres an update or something got fixed.. seriously.. big huge thumbs up to john!


this right here is why i recommend nismotronic to everyone i talk to...

Will the fact that I'm running E85 make a difference with the injector latency? @[url= URL=http://www.sr20-forum.com/member.php?u=4763]JKTUNING[/url]
My numbers are a little different.

Thank you sir.

Sure, on the side it has; 0280 150 842 JKTUNING

I can certainly make it an option.

Send me your TCD with the conversion and how you have it wired and I will add it in as a preset.

maybe JKTUNING could set this as the factory iat conversion for the startup tcd's, as long as its hooked up just like ours, with the 4.7k ohm resistors it should work for everyone, an its simple pl...

JKTUNING thank you, good post is good. :D

Id like to see JKTUNING or OnTheChip work something like this out for nismotronic

Yes, the O2 wiring was extended to reach out in the current location, so it maybe related to a circuit issue. I've disabled the O2 feedback and I'm running straight from the fuel map, it running a ...

Sorry for the late reply.

The placement of the sensor (in the pipe) is fine. To be honest, I am not too familiar with Nismotronic ECU's, having never had one myself (I require OBD2), but I know...

Can you repin the sensors or do they need cut and spliced? Same for the connector for the ecu?

I could definitely make that happen if there would be interest in it.

NEMU is more tunable then AEM F/IC. You can make your own or just repin your harness. But if you want a 100% drop in solution then it's your only bet.

Maybe JKTUNING can convince the company th...

Just curious, what was the difference in timing maps between the 93 octane and e85? JKTUNING

When I had the N60 it was setup for that. I just had to update the nemu to see the DE maf now.

I assume you updated the tune for the N60 maf right? Also I would stick to E60's since they are newer and easier to wire in, plus should be widely available.

At the end of the day I'm done with...