All posts where JKTUNING has been mentioned by other members.
JKTUNING yea I appreciate the reply! Hopefully I'll be getting around to setting this up very soon.
can 9.1 ohm injectors be ran on the nemu?!?
Big thanks to JKTUNING for getting me a replacement V1 ADC so quickly.
No longer corrupts tunes, car runs perfect again! :bigthumbup:
My devotion to this project has hit an all time low in the past 6 months. I desire to see this controller installed on peoples cars, but I lack the time to finish it completely. So to help expedite...
Thanks D-Unit121. OnTheChip and JKTUNING , can you also chime in when u get a moment...?
Flexsensor+NEMU1+NEMU2 ADC box not working
If you can email me a step by step of how to repro this I will check it out!
I am not sure I follow exactly what is going on here.
Bug: Triggering download with keyboard
JKTUNING
That is his forum name. Try a PM and give him some time and be patient for a reply. I believe email is best.
[email]john@j-k-tuning.com[/email]
Noted. The AFR offset should really never be any more than 1 AFR off in either direction.. optimally it should be under +/- .5.
This is definitely either a ECU ground offset issue or the wrong c...
Limits like this should be listed in the help section! JKTUNING , there's an improvement proposal :)
Yes, old capacitors first needs to be desoldered and the new ones installed and soldered.
You don't have to, but it is a good idea to replace the caps since pushing 20-30 years is hard on them. ...
Yes, that is correct. You would only need the v2 adc box and the firmware upgrade (when it is available).
The only real reason to upgrade to the V2 board would be for the accelerometer data ...
What would be the cost/process to upgrade from V1 to V2s JKTUNING??
What is it that you would like to accomplish that requires that many inputs?
That looks awesome!
well JKTUNING ?
That's actually a good question.
You might need to shoot [email]info@hrtuning.com[/email] and email to ask them how they have those outputs setup.
JKTUNING I do have a question about that rd1 update I just noticed though. If I have my vvl wired to the egr output, what setting is that for the "light" to illuminate on the rd1 once vvl is engag...
Are the outputs active in the data screen? Do they ever turn on?
Can you send me your tune file via email? [email]john@j-k-tuning.com[/email]