Thread: ADX file needed for TunerPro R/T data acquisition and map tracing.

I'm looking for an ADX file for a B13 R/T ecu, can't seem to find one on here or really anywhere online. Can someone point me in the right direction?

@JKTUNING

TunerPro ADX files are not able to use the Consult protocol, therefore there are none.

But they are able to read Calum's fake consult protocol right?

I've never heard of Calum's fake consult protocol. The data logging protocol is determined by the ECU code.

Calum made the daughterboard be able to tap into the consult and get the readouts. Hence you didn't have to plug into the Consult port, just one USB cable for upload and logging.

Right, that's the hardware connection. The ADX file sets up the software connection for TunerPro, but will not handle the Consult protocol.

Ahh, well that explains it!

I did find an old copy of CalumSult that integrates with Logworks (13 parameters including TP), but I am having a little trouble getting it running. We'll see how it goes.

I am about to purchase a NismotronicSA for a customer. I have a feeling that I'll want one for myself after setting his up.

That's why you could get it to work with TunerCode (and why it didn't work with regular Calum's)!

You need to go back and search Calums stuff on how to properly use his RT ecu! Its here on the forum and on the other.