Dala's Likes Received

Before you go get a new pulley, test it first:

-Remove Cyl1 sparkplug
-Stick a long stick/extension down the cylinder
-Rotate engine by hand, until you reach TDC (you will know when the stick is h...

Before you go get a new pulley, test it first:

-Remove Cyl1 sparkplug
-Stick a long stick/extension down the cylinder
-Rotate engine by hand, until you reach TDC (you will know when the stick is h...

Before you go get a new pulley, test it first:

-Remove Cyl1 sparkplug
-Stick a long stick/extension down the cylinder
-Rotate engine by hand, until you reach TDC (you will know when the stick is h...

Harvest rainwater for waterinjection?

You can even make your own adjustable cam gears if price is of concern.

Several CG13DE engine builds I've seen, have had homemade cam gear solutions.

Example 1:
https://www.micra.org.uk/atta...

Harvest rainwater for waterinjection?

Harvest rainwater for waterinjection?

"Panasonic BR2330A" style battery ordered from ebay (shipping from moates was 16x the price of the battery!!)

I will update this thread when I get it.

"Panasonic BR2330A" style battery ordered from ebay (shipping from moates was 16x the price of the battery!!)

I will update this thread when I get it.

Ah

Stock o2 sensor is a narrowband sensor. It will only output high/low voltage. It cannot be used to monitor AFR at all. It is only used for closed loop operation, to switch the mixture between r...

It is now confirmed that the Primera 2.2L Diesel 6speed shifter works with the swap! Posted some pics in my thread
http://i.imgur.com/3RVG9qg.jpg

You and me both:

http://i.imgur.com/jcJec0K.png

It is now confirmed that the Primera 2.2L Diesel 6speed shifter works with the swap! Posted some pics in my thread
http://i.imgur.com/3RVG9qg.jpg

I am very happy with them :) Should handle a lot of power, with no risk of crooked/squished bushings :) :) :)

Eh, they were kind of what I expected. I enlarged 6 holes in total with a 14mm drill. I had to cut and reweld one flange, and I think I know why.

http://i.imgur.com/I80HzsX.png

During product...

Eh, they were kind of what I expected. I enlarged 6 holes in total with a 14mm drill. I had to cut and reweld one flange, and I think I know why.

http://i.imgur.com/I80HzsX.png

During product...

Here's some more info on the hybrid passenger side axle

http://i.imgur.com/poPKw25.jpg

"Passenger side axle, 2004 Sentra SpecV 2.5MT w/ABS"

It has the exact same shaft! 27mm diameter, 25sp...

Sure, Haltech Elite series is maybe the most common one

Here's some more info on the hybrid passenger side axle

http://i.imgur.com/poPKw25.jpg

"Passenger side axle, 2004 Sentra SpecV 2.5MT w/ABS"

It has the exact same shaft! 27mm diameter, 25sp...

I got lucky, since the used B15 Sentra 2.5 axle had very good quality boots already on them. You have to use boots specifically made for the B15 Sentra, since they are not round. If you try to use ...

Here's some more info on the hybrid passenger side axle

http://i.imgur.com/poPKw25.jpg

"Passenger side axle, 2004 Sentra SpecV 2.5MT w/ABS"

It has the exact same shaft! 27mm diameter, 25sp...

Here is my finished driver side hybrid axle, hope the visualization helps someone else
http://i.imgur.com/2Utzf8p.png

Eh, I have been running those type of clamps for 4 years with no issues whatsoever. Clearance is the main issue, it's not possible on some cars. B13 has plenty of room, so it works here.

If you ar...

Good luck!

One of the reasons these pipes can leak coolant, is due to corrosion. They like to corrode heavily between the hose and pipe, causing an uneven surface and potential leaks. Be sure to...

I know you keep saying you have a simple setup, but in the future, as soon as you change one variable in your setup you're gonna have to retune.

Get Nismotronic, and future you will have it easy!