All posts made by Dala that members have liked.
Nice to see some alternate ways to go about this. His design seems more complex, since he incorporated some extra things like voltage display, rotary encoder for something and in general more compo...
Coil driver showed up!
http://i.imgur.com/itpViHl.jpg
It's essential to keep it cool, so I mounted it to a huge chunk of aluminium along with thermal grease on its back. I now have all the pa...
I ran into some issues. When I have everything temporarily connected, it doublesparkes the sparkplug. See attached video, I spin the CAS by hand:
http://www.youtube.com/watch?v=Glbz_Ym2Ekw
For each...
I ran into some issues. When I have everything temporarily connected, it doublesparkes the sparkplug. See attached video, I spin the CAS by hand:
http://www.youtube.com/watch?v=Glbz_Ym2Ekw
For each...
Coil driver showed up!
http://i.imgur.com/itpViHl.jpg
It's essential to keep it cool, so I mounted it to a huge chunk of aluminium along with thermal grease on its back. I now have all the pa...
Everyone can try to help if you post a log from the start/bog. That way we can see what all your sensors are saying. Please upload a short log of the issue! :)
Everyone can try to help if you post a log from the start/bog. That way we can see what all your sensors are saying. Please upload a short log of the issue! :)
Neutral switch is also used for idle/evap on some type of ECUs. I am unsure about the stock ones, only familiar with Nismotronic.
Oh, missed that. But still, check the wiring between the ECU-IACV
One pin is constant +12v with the ign on, the other pin is controlled by the ECU, switching PWM ground. It can be checked with a...
Big thanks to JKTUNING for getting me a replacement V1 ADC so quickly.
No longer corrupts tunes, car runs perfect again! :bigthumbup:
The cheapo china gps module arrived:
http://i.imgur.com/Y9nVOE1.jpg
It works really well, gets a signal really fast, even indoors. One thing that is annoying, but not related to the GPS, is the s...
Sorry, but that is just plain wrong. Speedometer input to ECU is utilized for a multitude of purposes. Other from the speed limiter, it can be used to raise the idle speed while rolling the car. Th...
Sorry, but that is just plain wrong. Speedometer input to ECU is utilized for a multitude of purposes. Other from the speed limiter, it can be used to raise the idle speed while rolling the car. Th...
Right now I don't have any pics of it mounted, this is all I found from my build thread:
http://i.imgur.com/Bn1f5PD.jpg
http://i.imgur.com/Dl3MpWa.jpg
-I would recommend enlarging the bolt h...
Right now I don't have any pics of it mounted, this is all I found from my build thread:
http://i.imgur.com/Bn1f5PD.jpg
http://i.imgur.com/Dl3MpWa.jpg
-I would recommend enlarging the bolt h...
I did it! I got the needle moving! :D
First I wanted to learn more about the scope. I tried out a chebyshef lp-filter,
http://i.imgur.com/t864Ini.png
That worked perfectly, and you can really ...
Thank you so much wildmane, exactly what I needed to know.
I will head to a general electronics store today, and pick up some resistors and caps. Current prototype in my head:
-Arduino Uno PWM-...
Depends on what O2 sensor you have.
I helped diagnose a car where the O2 sensor just wouldn't cooperate. Car had full stainless steel exhaust. Stock 3-wire O2 sensor didn't work well, so we upgrad...
It is now confirmed that the Primera 2.2L Diesel 6speed shifter works with the swap! Posted some pics in my thread
http://i.imgur.com/3RVG9qg.jpg