gomba's Likes Given

Lol. The setup was almost too perfect. I swear she was not acting. She had NO clue about what was going on. How she's worried about putting on her makeup and everything, I waited til she put her l...

It's cooling effects is the BIG winner here and not simply octane

Also, this in tail with the "octane" rating allows some ungodly amounts of timing to be ran......which as mentioned before, is whe...

Re: GI: Custom MFactory Helical & Plate LSD's and Gears

http://www.youtube.com/watch?v=LGWwaFwVpoU

Exhaust from some car in junk yard + rachet = breaker bar ;)

Yes, just keep in mind that the 4.176 has to have it's mating pinion gear as well (aka main shaft).

The Ultimate 6 Speed Swap Thread...Parts/Instructions/Results!!

Do the job once and for all

Putting a B14/P10 is putting a bandaid on the situation in all honesty and you will end up spending more replacing 2 gearboxes as compared to spending the money/time ...

Doug Fab Hey it looks like the MAF was the issue, I took the old one out and the little circuit board inside the square housing on the MAF tube that is supposed to be connected to the connecter was...

sorry, i was confused. let me be more clear/confusing. i was referring to assembly #1 (iacv/aac).
yes, thats the plate. order direct, or, i think gregv carries them also.

gomba, you are correct. There is an aluminum passageway cast into the intake manifold that this device uses as part of the tract to the intake piping. This is a passageway completely separate from ...

Now, as far as the IACV/AAC valve that's used for cold starts? I've removed mine all together. Depending on your ECU, you can tune it right out, though.

The EASIEST way to tune it out, is to ...

obviously not hard enough my dickhead son

Yeah it will only go into gear if you rev match right lol every time you need to stop you just turn the car off, put it in first, start it and give it some gas as soon as it starts to help it get g...

I would say its worth atlease 20 degrees cooler. With the grill my temp gauge shows 230-235 when doing a lap. Without the grill it stays around 205-210. Behind my grill there is nothing blocking th...

That is correct. This is the case on GTiR T28 only. My T25 Jpipe fit perfectly on a Disco and GT28r

These convention's still happen? You fuckers are hard core! Ohio 2014 it is... Maybe I will build a shit box to come fuck up the track...

Best SR20 Drag Race Ever 2013

I think i have solved my duty cycle problem ! Tody i have rewired my Walbro 255 fp because i have measured the voltage with stock wiring and its show me 10.9v at wot. Now it wired direct from batte...

The server went offline due to a sister forum located on our dedicated box that Crim sublets. Something questionable was uploaded, and Google caught it and flagged/notified the admin of that forum...

U say ALMOST everything has been done before
and yet it seems like im the only one with mine

:confused: guess this means im on my own lol.....
Am i the only one who did a GTi-R to a Miata sw...

Iron Man Convention Experience

What Dave said, but you don't want to really test it. Never allow the ECU to overrun your map. Always have 1-2 row buffer that are a good bit above your boost level to protect you incase you overb...

i torched and pried with a screw driver
http://i102.photobucket.com/albums/m109/charleekeo/76B0C2B2-C814-4BFE-8C76-B4A298E2F4B8-17895-000007A5BEA4C868_zps41667fde.jpg

then clean off the left o...

Re: Rear Sway Bar + Shocks/Struts...So what's next?