If the compression is raised on the 2.0L, 235hp and a mean powerband can be made with the ported head, my custom cam setup and your intake manifold with a larger TB. Only thing you will need is a p...
I'd love to log the difference. I'm betting that turn in is better, but steady state will give up some grip. For a DD Street car, this isn't really a bad thing.
I'm not sure you were aware of it, but I have gr2 's with cut springs on the SEL's front. It took the front down about 1/2". The rear has Tein basics. GR2 's with untouched stock springs is what I ...
Wow.This has been gone over about a bazillion times,and it's really become tiresome.Pioneering your own ideas is fine-if you have done your homework.Just randomly coming up with a half-baked idea b...
I've autocrossed my B14 for 11 years,with decent success.I run it in DSP,which is sorta pointless on a national scale,but you can pretty much crush almost anyone on a local level.I do maybe 20-25 e...
You can also experiment with tire pressures. Each tire type and each suspension setup and each driving style and each track condition will have an optimum tire pressure bias from front to rear. H...
Slamming a car is not safe, your car bounces down the road and you are loosing traction when you go over a bump, i do not want to be riding next to someone who has little control over their car. Pl...
Just an update, Kyle and I were talking and came to a conclusion, when most of us say roll center, we really mean center of gravity. Roll center is a whole different animal, that is covered very w...
There is usually a reason a coil over is made for a specific car. There are lots of factors other than do they fit. Honestly if you just want to lower your car and dont care about the ride get some...
Big difference, KA is a Cast Iron block vs Aluminum. Just like Evo guys like to use ARP studs as well, again Cast Iron Blocks wont have the same issues with threads pulling out, distortion and so ...
You say ignore and he says no contact. You should have made it public from the get go and this could have been resolved. He has several other transactions during that time that were positive.
When we first ran our old S15 drag car, it used a OEM DE crank in it, rev'd to 11K or more. Oh yea it also had N1 cams in it also when we first started. N1 cams may not be your best option though.
We have used several engine setup with the "VVL killer" cams. We tend to use these more in a higher horsepower, more abuse engines. It completely eliminates the "VVL" lobe in the cams. The specific...
I think it also is audience... I 100% think it is a great car in stock form compared to other cars in stock form. I also think most people wouldn't know what a neutral car is even if they drove it....
All you really need is to buy or rent a spring compressor and everything else is very straight forward and universal. By universal I mean online videos of how to replace springs for other cars sho...
At the arrive and drive event this past weekend the FRS was nicknamed "Plow-King". Great nickname for a car that is all about handling. I signed up but decided I had better things to do.
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top