All posts liked by OnTheChip
I've been having an an issue with high idle ever since I went OBD1, goes back to even Calum RT that I had. Every few days/weeks the car will start and will idle at 2500 rpm and not return to 800rp...
The alphaN/TPS is by far the hardest to tune and should really ONLY be used to tune an ITB car.
Speed density allows for a lot more options as far as intake pipe placement and diameter and can b...
I have read through sections as i needed clarification, but i should go back and read the whole thing. I love learning about this and would like to know the whole story as well. The car is running ...
Sweet, i was having this issue. The more i use the SA version the better it gets. There is a lot more to adjust for what i would call the setup side but it lets you get the tune right where you wan...
If you are running it through the ADC input, process is fairly simple
Setup (tab) > Sensors on the left menu > Wideband Setup
There should be 4 options
1) Input > Choose ADC1,2,3, etc or O...
Good stuff. Has a lot of features. Similar to standalones.
NismoTronicSA Official Release
Because the ADC inputs are now used for a lot more than just for logging.
You need to setup them up in the SETUP tab like stated by Evlnxr.
Also, with the SA version comes a completely re-wri...
The P11 SR20DE MAF is now available.. run NismoTronic with an active internet connection and it will auto update the MAF section.
After you update your VQ curve, adjust your kvalue and current i...
That shit is serious.
Big ups to John and all those associated with making this happen. I appreciate it, very much. I cannot wait to replace my tired old JWT ECU.
A little NismoTronicSA Dyno Testing (SR20DET hx40 video inside!)
Yes, it does have an anti lag function.
Here is an example of how to set it up.
http://www.j-k-tuning.com/NismoTronic/SA/RevLimiters.jpg
Maaan Real time or don't bother... ;)
By the time you buy all of the things needed to burn and log, your almost halfway to the point of a Nemu, the other half pays for it self everytime you have...
Here is a start to the list .. it isn't 100% complete but I will be updating it when I get a chance.
[url= URL=http://www.nismotronic.com/dealers_26.php]NismoTronic Dealers[/url]
I just want to point out that you can NOT do this. NPT is a tapered thread. So it only goes one way.
If you plan to try meth injection in the future make sure the sensor is before the nozzle. The meth will damage it.
so if anyone wants big cam idle and the low end performance of the small cams, I have figured out how to wire up a couple of "normally closed" relays by using two ECU ground points from the NEMU po...
Best tuning methods (affordable)
For reference
Calum Realtime/Basemap - Not personally used but have seen it in action. But with the development halted, the various options made available by a standalone are just simply not pre...
Looking forward getting a NEMU ECU myself! ITB´s mmm...
Woot!
Big thanks to JKTUNING, OnTheChip, and everyone else who is involved in this project!
The UEGO setup is the least of the great things about a NEMU + Nismotronic RT. :)
I'm a software developer myself... Great work from JKTUNING
Yes sir, thanks to Kyle I will be able to remotely provide support for customers!
I gotta say it's probably best to not have dislike for the sake of the community.