Help with MAF issues, running too rich
Hi,
I'm just starting to work with the RT ecu and I'm stuck with the MAF setup, I'm using a DE MAF (part 22680-2j200) from the stock P11.
This is the TCD I'm using,
DepositFiles
And this is the 3rd gear WOT roll log it generated,
DepositFiles
I've tested all the other MAFs but the only one that works is the VE MAF but the issue is that it runs extremely rich.
Another issue I have is that I'm running a vtec switch for the cams and when I go past 7600-7700 the rpm signal appears and dissapears repeteadly switching the cams on and off in the way.
I'm just starting to work with the RT ecu and I'm stuck with the MAF setup, I'm using a DE MAF (part 22680-2j200) from the stock P11.
This is the TCD I'm using,
DepositFiles
And this is the 3rd gear WOT roll log it generated,
DepositFiles
I've tested all the other MAFs but the only one that works is the VE MAF but the issue is that it runs extremely rich.
Another issue I have is that I'm running a vtec switch for the cams and when I go past 7600-7700 the rpm signal appears and dissapears repeteadly switching the cams on and off in the way.