I highly recommend the Dunlop ZII's.I daily drove their predecessor,the Star Specs,and just drove the ZII's today at an autocross in a heavy downpour.Stuck like glue,no shit.They're dirt cheap from...
Yes its the five speed tranny out of a 95-99 maxima, as well as the 2.5 axles, just finished putting the 3.5 in it now. And loacted in Elmsdale just past the airport.
http://i43.tinypic.com/2kf19j...
Hey guys,
I just signed up and paid for the track day. It'll be my first track day and first convention! I'll be in the beginner group. See you guys in Atlanta!
I would recommend Carbotech AX6 for your situation. You can drive these to the convention and home again. They will give you solid performance on the track as well. You can bed them o...
I was able to stop the next batch of parts in time to make changes to fix this issue. I welcome feedback on things like this. I'm always striving to make a great product, but this fit the manifold ...
The conventional wisdom from the early days of the Forum was to go with the next to the last mark on the right for 15* (just like Ben's figure above). It was generally thought to be safe to run 17...
Pass. Pittsburgh 1/2 torque wrench. I bought this while I couldn't get my hands on my fathers snap-on wrench. Feels great, has a very definite feel and solid click. Teeth are not fine but that is o...
also to get an accurate idea of the tune based on the look of the plugs; you are supposed to start with fresh plugs and shut off the car during a run and immediately check them.
On a cold motor, you will get some blow by on a leak down. If you hear it coming out the tail pipe or out the intake, that would be bad. Ultimately, you need to do a compression test with the motor...
yes now take them back off before you do damage. they prevent the rocker arms from coming out freely. this traps them under the cam and will destroy the rocker arm and damage the cam. I had them on...
No need to chop it. take the engine and tranny out. ship the engine and tranny separate from the chassis to me in SC. I will put back together in SC with a kit car title. Boom jdm registered car si...
Once you test fit the header to the head and look at how the gasket fits the header and the head you will see what's going on. All you probably need to do is slightly enlarge the stud holes in the...