All posts made by cortrim1 that members have liked.
Chris I hope you get things worked out. You know I am only a phone call, text message or email away.
got a skeleton frame for the gopro and made some videos with sound enjoy
wheel spin video for Bes
[url= URL=http://i31.photobucket.com/albums/c393/cortrim1/GOPR0023_zps21145e94.mp4][img]http://...
I got a new gopro and set it in the car for my first video of the ve-t . 1-3rd letting off in third. had to use the lower resolution setting because my 32gb sd card will not be here until tomorrow....
Pics of Asp manifold mounted
Pics of my new ve-t manifold
Some members take breaks. I know I was off the forums all together for a year or so. I have been modifying B chassis cars since 1998 and don't plan to stop any time soon. I also talk to many of the...
Some members take breaks. I know I was off the forums all together for a year or so. I have been modifying B chassis cars since 1998 and don't plan to stop any time soon. I also talk to many of the...
Some members take breaks. I know I was off the forums all together for a year or so. I have been modifying B chassis cars since 1998 and don't plan to stop any time soon. I also talk to many of the...
get a motor from miko. his stuff is hand picked and will be cleaner than anything you can buy from a importer.
I got a new gopro and set it in the car for my first video of the ve-t . 1-3rd letting off in third. had to use the lower resolution setting because my 32gb sd card will not be here until tomorrow....
it actually gets good traction in 3rd. Its scary in 4th. Speed limit on that road is 50mph and I was going a good bit faster than that when I let off. Going to get some highway footage tomorrow.
I hand lapped my valves before I reinstalled them. Dom you should buy a valve master tool. Wait till you try to reassemble the the lisle. I did it once and will be buying the valve master if I have...
I got a new gopro and set it in the car for my first video of the ve-t . 1-3rd letting off in third. had to use the lower resolution setting because my 32gb sd card will not be here until tomorrow....
I got a new gopro and set it in the car for my first video of the ve-t . 1-3rd letting off in third. had to use the lower resolution setting because my 32gb sd card will not be here until tomorrow....
installed the rear cut off switch so I can pass tech inspection at the convention. I also set it up so it was easy to wire the switch out of the circuit. that way the switch will only be connected ...
yes now take them back off before you do damage. they prevent the rocker arms from coming out freely. this traps them under the cam and will destroy the rocker arm and damage the cam. I had them on...
yes now take them back off before you do damage. they prevent the rocker arms from coming out freely. this traps them under the cam and will destroy the rocker arm and damage the cam. I had them on...
yes now take them back off before you do damage. they prevent the rocker arms from coming out freely. this traps them under the cam and will destroy the rocker arm and damage the cam. I had them on...
Chris make sure the ecu connector is seated all the way and is straight.
You have a oil feed issue. nismo_star pretty much broke it down for you. Also 10w30 is not good on a turbo car. I run 20w 50 vr1. the lowest I would run is 10w 40. Also are you using the correct oi...
No need to chop it. take the engine and tranny out. ship the engine and tranny separate from the chassis to me in SC. I will put back together in SC with a kit car title. Boom jdm registered car si...
went out to the woods to work on my boys 72 Chevelle SS with a lq9 swap. So I took a picture of the car with a scenic back drop.
http://i31.photobucket.com/albums/c393/cortrim1/20130406_163849_z...