All posts made by cortrim1 that members have liked.
This was a simple build which should have been executed with ease. I know Jamie will do his part to make it right.
This was a simple build which should have been executed with ease. I know Jamie will do his part to make it right.
There are always two sides to every story. I hope both sides come out in full. I also hope both both parties can get this resolved.
There are always two sides to every story. I hope both sides come out in full. I also hope both both parties can get this resolved.
runs were done at 18 and 20psi. the gate was having a hard time keeping up at 20psi so we left it at 18psi.
setup
sr20ve
de 8cw crank micro polished
manley H beam rods
cp pistons swain coated
ac...
I will be getting a set of these. I met Steven in person earlier this year.
installed 20v valve cover and changed the ic couplers to black.
[url= URL=http://s31.photobucket.com/user/cortrim1/media/20150411_181409_zpsigveezth.jpg.html][img]http://i31.photobucket.com/albums...
installed 20v valve cover and changed the ic couplers to black.
[url= URL=http://s31.photobucket.com/user/cortrim1/media/20150411_181409_zpsigveezth.jpg.html][img]http://i31.photobucket.com/albums...
installed 20v valve cover and changed the ic couplers to black.
[url= URL=http://s31.photobucket.com/user/cortrim1/media/20150411_181409_zpsigveezth.jpg.html][img]http://i31.photobucket.com/albums...
installed 20v valve cover and changed the ic couplers to black.
[url= URL=http://s31.photobucket.com/user/cortrim1/media/20150411_181409_zpsigveezth.jpg.html][img]http://i31.photobucket.com/albums...
installed 20v valve cover and changed the ic couplers to black.
[url= URL=http://s31.photobucket.com/user/cortrim1/media/20150411_181409_zpsigveezth.jpg.html][img]http://i31.photobucket.com/albums...
installed 20v valve cover and changed the ic couplers to black.
[url= URL=http://s31.photobucket.com/user/cortrim1/media/20150411_181409_zpsigveezth.jpg.html][img]http://i31.photobucket.com/albums...
Took a few pics with my woman's D90. I think I will stick to point and shoot.
http://i31.photobucket.com/albums/c393/cortrim1/DSC_1736.jpg
http://i31.photobucket.com/albums/c393/cortrim1/DSC_17...
Jay I have never had a step up relay fail. I always use new relays. Don't forget to put a fuse between the relay and the power source.
I would just buy a new compressor housing and get one for a gt28r which will be a upgrade.
I would do valve springs and retainers if you have the extra cash. turbo cars will beat the hell out of the rev limiter and sooner or later you will get to play a game called find the shim.
I have zero wheel hop. I run a combo of place racing and jwt motor mounts. I also have the custom steel dog bone which is a pain to get on but keeps the motor from shifting around. I also have trac...
make sure to use a relay between the ems and the solenoids. the on board driver burns out very easy. if your using a series 1 ems they have some funny gnd issues.
Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...
Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...
Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...
Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...
Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...
Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...