Did you test the MAF? Is it properly grounded? Also did you try to bump the idle. UK motor has bigger cams so it will act more lopey if the idle is a bit low almost like S3s.
You can get a piece of hose the size of the smaller inlet/outlet and lay the larger hose on top of that. It will fit and shouldn't leak, but its not great.
That's a lot of disc to hold T25 power level. What type of discs failed on you? The ACT have become notorious for failure and many people around here hate clutchnet
Totally. The only reason I run AGX so much is that i repeatedly run into low-mile sets from reputable members for a steep discount. It has happened at least 4 times no kidding.
I've had problems getting the spring and hats to settle in properly and do this. I had to pull the assembly part way apart (without letting the top nut off) and shift the rubber donut and make the ...
You check the ground/bolts on the starter? I've had the ground come loose to the point where it looks like its on but its not tight and that did enough to make it act dead. It happened to me on a B...
They have a vendor section on the other forum. I've been kind of arguing/discussing with their customer service representative. They seem to think the updated part is the answer whereas I am of the...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top