All posts liked by 92SentraSE-R
best run to date second time ever at the track stock internal vvl b13 sentra with cold air intake, ebay headers, and a 2.5inch cutout removed seats nothing in trunk and 200 treadwear direzza street...
Heh. This upload failed seven times but the eighth attempt worked.
https://dl.dropboxusercontent.com/u/34879635/SR2014/Honda%20Sucks%20Hi%20Stratton.jpg
https://dl.dropboxusercontent.com/u/34879...
yep they sure do.... somewhere around the 550whp mark, they do let go.
https://www.youtube.com/watch?v=a66vU4yfNko
They aren't required. Nissan put those there to alter airflow characteristics across the pintle, but I've run plenty of cars without them and they've run just fine. I wouldn't be too concerned.
If...
I just modified the hose in my compression tester so it could flow into the cylinder.
Wow, that sucks. I'd go look around the block for someone with passenger side damage.
While you're probably right, don't completely dismiss the alternator as a potential problem. Depending on where you got it from, it could even be the most likely culprit. Most part-store rebuilt ...
92SentraSE-R had a good write up about using bicycle chain lube... you basically just get it and spray it under the covering of the cable everywhere now and then, douse the thing
There's a hose that comes off the intake for the air regulator, that hose goes there. It normally goes to the intake hose between the MAF and the throttlebody.
IMO JWT is hit or miss. Since you're trying to boost a stock VE, i would think you would want a great tune so that you don't blow up your setup. I would recommend Calum R/T, Nistune or anything els...
Use the intake manifold from the B14 or other non-RR SR20 in the USDM (and those associated sensors) and it will be plug and play.
You take out the pump and pump from there, not through the filler.
Just to update you all.
My car was recovered on Wednesday and all that was taking was the electronics. Headunit, amps,sub,scan gauge and iPod.
Waiting to hear back from Geico on the repairs...
You fucking hop the curb and chase his ass. Next time have a gun with you and really scare the piss out of that shit. When i was a kid on a overpass in my dads 521 pickup some kids were hanging wit...
You can try it. ECU should pull timing back to dial out the knock if everything is stock and plugged in. You might end up doing more harm then good since the reduced efficiency of the overly retard...
Let me know know when you make out in the Bay Area. I can try and meet up if you want. Might be able to get a few people.
Wasn't Able To Make It... Next Event For Sure...
Yes sir I went again. I got a new time not anything big but better than nothing lol. 15.73. I also beat a Corvette since he slept at the light hahah. Ill get the Video up soon since I record upside...
Our Former b13 race car also had the heater core completely removed (less water in the system thus less weight) along with all the A/C lines completely removed and then the firewall holes filled (w...
So after a lot of working out numbers and really trying to make it all work. Here is the pricing, this is for all materials and the time it takes my guy to put these together. If we can get an init...
very reasonable for the quality!
We should all be thanking TRACKFORGED for taking the time to develop, test, and make a header. Others have come and gone before them and when people see the price tag they complain and go buy the ...