All posts liked by NI SER-1
Ok. Example: mazworx motor mounts are 400$.... The rear mount from an auto p10 lines up with two of the bolt holes perfect you can drill a hole for the last bolt and for mount alignment, p10 auto m...
Just to update this my detonation issues were for a bad tune where I had A/F ranging from 12.5 to 13.0 so you can imagine why the high egt temps. After fixing the tune not a single problem has ha...
A man in a similar situation as you wanted the same goal. he purchased a JDM engine to swap out his USDM. USDM has the emissions stuff that JDM does not so the swap is easy. There is really nothing...
not a prob guys.
years ago ford gave us a conn book to keep in the shop to find conn for ford vehicles easily.
I remembered the book and im always looking for conn pigtails. so when I was do...
http://i102.photobucket.com/albums/m109/charleekeo/C0EA39A6-3FA3-4B9A-B361-9D384EB56F08-57164-000016D0D64D9F20_zps4a2e81be.jpg
I could be out in left field on this, but this is what I've gathered throughout the years.
Top-feed pros:
Better availability, especially as flow-rates increase
Cost (cheaper)
Side-feed pros:
Ou...
The B15 MC will be at an angle, and you could have air stuck in it. The Maxima MC fits perfect and will work if you use the top of the B15 on it. See here: How To: Hydraulic clutch converstion -...
From the grave.
315/25/19
https://scontent-lga.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11102784_1020922227937597_2402761296034370317_n.jpg?oh=7c96b1da735a0e26b49c2fe8526c4986&oe=559BF31C
I would look at the Z33 trans as that is what is also used in the Frontiers and Xterras. The Z32 I cannot speak on but I would think since the Z33 was used in SUV/Truck applications the shifter wou...
Well, I had this one made and only because I don't think many B13, B14s have them.
[url= URL=http://s147.photobucket.com/user/mickeyser/media/2014121795162019.jpg.html][img]http://i147.photobuck...
"Fresh paint and any minor body damage repaired" and no mention of how many owners or it's history. Does appear to have an OEM muffler on it, but no fogs. I'd proceed very carefully.
I have at least 3 spares here that came off clean JDM engines with low miles if you are interested....PM me
Indeed. Good summary. Thanks to BenFenner for bringing this topic up.
I lied. Of course there is no balance bar. I'm an idiot.
FYI: http://www.sr20-forum.com/vendors/73174-turbo-oil-feed-line-kit-59-00-shipped.html
the upper bolt hole needed to be enlarged. The two firewall bolts line right up. Very easy install.
My b13 with Altima pedal looks like it came this way from the factory.
Bad Grounds Lead to Wheel Bearing Failure
Vin is stamped on trans, call infiniti dealer with it and ask what pn is for the transmission.
There is a small plate that must be removed before you can remove the reverse idler gear on a 2001+ transmission that earlier models don't have.
Check the photos on the top post of this page:
...
I was thinking something easier...
1.) Call glass company
2.)Pay them
3.) see clearly again,and live happily ever-after.
LOL
Its your Nissan Rejecting Civic parts...LOL
It refuses to have Non Nissan accessories applied.
Keep it simple DET, VE's are overrated.