1fastser's Likes Given

Good call 1fastser

Most folks will tell you to avoid silicone hoses because they slip more easily than rubber. Your call on what part to replace them with. I would buy OEM if possible.

Yep, they have this part on their page because I had them make one for me. Gave them all the dimensions they needed to assemble it.
Love mine. I went with it after my long used GTi-R wastegate actu...

did DSS do the hubs for you? I remember we were talking about that a long time ago. Good option if they now have the tooling to do it quicker now. Glad to see you almost got this done now. Definit...

Inner Tie Rod Tool

Got the clutch slave cylinder on and plumbed

http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs/IMAG0014_zps2r7tspqy.jpg
http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs...

Did you put lock tight on the bolts for the carrier bracket? I rem coheed said something about his backing out often till he put some on them.

got the rear motor mount in

http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs/IMAG0001_zpsieggtsbj.jpg
http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs/IMAG0002_zpsm8...

Over four years later, here is the part number for the grommet[url= URL=http://www.sr20-forum.com/members-rides/554-benfenner-s-1994-black-se-r-26.html#post749033]:[/url]

11812-41BOO
or maybe
1181...

Exactly. The staff police themselves (very well in my opinion). If that doesn't happen, the members can, will, and have policed the staff.

You got it, I personally don't spend too much time calculating the K value, since I can edit it while I drive and see AFR's in real time. Now also that's not my formula, that's the one I found on ...

Nice new toy. Valentine's arrow patent expired in 2012, so it was just a matter of time until someone released a RD with arrows. At this point, top of the line detectors have plenty of range, and t...

The expansion valve is in the evaporator box behind the glove compartment.

The oil pan is an easy fix once it's off. 5 or 6 whacks with a ball peen hammer and it'll be good as new.

Cleaning up the pan rail and block surface super squeaky clean will take more time than ba...

Did a few things tonight. One of which was put the hybrid driver side axle in, which I made from a b13 Outter+shaft and spec v inner and it looks like it's gonna work perfect.

http://i1317.photo...

And now for the rest of the story...

I guess this all starts 6 months ago with PLAN A: we got a wild stick up our ass to build a new engine for the #58 car. Needless to say, the pistons arrived...

On a side note Ive almost finished my bar hehehe
https://farm1.staticflickr.com/573/21792480992_df5bfe02ae_k.jpgBar by Mattick22, on Flickr

As the insulted moderator it would have been nice to receive an apology first. But if he has cleaned up his act and can act grown up then I certainly believe in second chances.

Removed, cleaned, and painted the cowl.

Also added some weatherstrip where the foam strip is on the cowl (to keep water away from the hvac intake.)

Yes, Mark and I have been in contact lots over the past number of months through personal stuff and the f over factor of chapnutz, we've become pretty good friends. For that reason to keep two fri...

This thread makes me sad on several different levels.

P10 6 Speed Swap Guide / Writeup / Notes

chapnutz1 ripped off members of the community. He was banned from the classifieds and blacklisted for that. He then made a credible threat toward a forum member while already "on probation", so he ...

IT SHIFTS!! WHOOHOO!!

I removed the shift check bolt, stopper bolt and the shifter check ball bolts springs an balls and it freed up then I reinstalled everything and it goes into all gears...

I...

Ya.. for once something fit in my car without me hacking shit to make it fit :)

nice, no chop fitment