All posts liked by macakin
It's the E60 VQ table.
It's a good table to use as template when building a custom VQ table. I also recommend the SR20VE, N1, and B14 VQ table.
Mind sharing how you built your own VQ table? :D
I can share some of my experiences playing with different MAFs(Nissan and Ford’s).
Changing the K value alone would be not sufficient when using a bored MAF housing or placing the MAF sensor i...
ECU Tuning this is a very good read too. Helps with all nissan ecu's.
TP and K are related. The relationship is TP~K*Q/N
where Q is from MAF VQ table, N=RPM, and ~ means "is proportional to". When you open the throttle (add load), Q goes up quicker than N, so TP (loa...
Forget WOT. If tuning Nistune, Calum or chipped ECU, simply adjust or uncheck Alpha-N WOT operation (or set it to 255 / 5V / etc).
0.45V - 0.55V TPS Closed is the range, which makes 0.50V the bes...
Timing chain help info needed!
i'm using AC/EGR, works great! :D
My wire tuck....
[url= URL=http://www.subirimagenes.com/otros-28558223846311618505-7626429.html][img]http://s2.subirimagenes.com/otros/previo/thump_762642928558223846311618505.jpg[/img][/url]
just expanding on a few of these figures here, which i revised to better suit real camshaft durations at 0.05'. things of note..
There is 4.75 inches of air travel within a ve head. its been docum...
spark plugs leads , part number 22440-1N510
[URL="http://i1334.photobucket.com/albums/w660/sss4me/IMG_0757_zps0943203f.jpg"]http://i1334.photobucket.com/albums/w660/sss4me/IMG_0757_zps0943203f.jpg[...
Well I think I found out what it was. I read on another members post who had an extremely similar problem that it was the distributor. So I swapped that out and it haas been runnig fine ever sinc...
Trackforged Tri-Y header completed!!!
Ricardo, you're the skinny kid at Famoso Raceway right? I'm more than likely going to be selling my M&H 22x8x13 slicks. These things hooked like hell for me at Famoso but I need to go up to a 23" s...
Well I have a sr16 tranny with a 4.78fd and trust me that 4.78 made a big difference on it
Sent from my SPH-L600 using Tapatalk
I made 300+ on a stock ve well at least that's what it felt like with my 260+ish on a 86x86 highcomp
this is just plain stupid out of control. too much for my pencil brain to comprehend. jesus christ...
Payu, thanks Payu, that car seems to take off quicker? The driver is 100%. That team is no joke.
Hi,
This will not necessarily be a group buy however, the more orders we send it at once the better and may drop the price down a bit.
Please contact us with the specs you are looking for.
Thanks
You make it sound easy lol. Lets not forget he needs a good headder and intake system. Plus cams, springs and retainers. You would not want to build a 2.3 and be running around with everything else...
Pretty much this.
http://stream1.gifsoup.com/view6/2605850/make-it-rain-o.gif
Re: 88mm on a budget!! (Not on budget anymore!!!) New Dyno!!
Picked up 11whp over M1 when we switched over to M5.
Surprised you did not see larger gains. What are you using for a fuel pump? Going from a -6 to -8 feed netted another 6whp on a single bosch ...