Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: My SR20VE/32v Build...Pictures and Part Numbers

+ Reply To Thread
Posts: 1-10 of 99
2015-03-16 11:28:08
#1
My SR20VE/32v Build...Pictures and Part Numbers
Flashback to Dec 2013... bought a low k sr20ve and vzr 32v gearbox.

[URL=""][/URL]

[URL=""][/URL]

part numbers 13020-1N519 and 13020-1N521. previous owner had fitted n1 cams, but didn't get around to starting it.

[URL=""][/URL]

the start of big things to come.

[URL=""][/URL]

Then the hoarded parts for the new build.

Fidanza flywheel. part number 143201

[URL=""][/URL]

[URL=""][/URL]

SR16VE Rocker cover. part number 13264-1N500

[URL=""][/URL]

i was maybe the first guy in australia to pick up the new Nismotronic SA daughterboard. The idea of using my old FICV and EGR plugs to switch the vvl, and the great e-tune service offered by John Kerr were contributing factors.

[URL=""][/URL]

Genuine N1 pistons and rings were bought before the big price hike. these were notched to clear the oil squirters. part number a2010-1n521.

[URL=""][/URL]

Rings. part number 12033-2j210

[URL=""][/URL]

20v alloy a/c bracket replacing the heavier standard one.

[URL=""][/URL]

Front and rear prothane mounts.

[URL=""][/URL]

new rocker cover seals. part numbers 13271-2j201 and 13270-2j201

[URL=""][/URL]

ARP flywheel bolts, part number 102-2803. VVL Solenoid gasket , part number 13270-1n500. IACV gasket , part number 23785-2j200. New style chain tensioner, part number 13070-2j203, and gasket, part number 13079-2j200. Q45 throttle body gasket 16175-61u00. front oil seal, part number 13501-53j10 , rear oil seal, part number 12279-AD205.

[URL=""][/URL]

universal heater hose. dayco 80416.

[URL=""][/URL]

7-layer vet exhaust gasket , part number 14036-8h600. n15 thermostat , part number 21200-0c811. sr20ve rotor head , part number 22157-1n510. sr20 timing chain , part number a302h-53j0cvw. injector o-rings.

[URL=""][/URL]

gktech water adapter (removed the neck).

[URL=""][/URL]

new head bolts , part number 11056-53j01

[URL=""][/URL]

sr20ve dizzy cap , part number 22162-1n511

[URL=""][/URL]

ACL race bearings with 5 hole mains/17mm rod. part numbers 1T296, 5M2975H , 4B2960H

[URL=""][/URL]

new water pump , part number 21010-53j05

[URL=""][/URL]

chose the extra ribbed b15 oil pump , part number 13500-6M00A.

[URL=""][/URL]

Tomei cam gears for the n1's, part number 13024r310. light and strong.

[URL=""][/URL]
Last edited by sss4me on 2015-03-19 at 02-01-05.
2015-03-16 12:27:47
#2
defi dins for the dash.

[URL=""][/URL]

balanced and blueprinted bottom end assembly done.

[URL=""][/URL]

new vvl solenoid block , part number 23796-1N51B

[URL=""][/URL]

Innovate mtx-l wideband

[URL=""][/URL]

[URL=""][/URL]

new knock sensor , part number 22030-30P00.

[URL=""][/URL]

Metal head gasket , part number 11044-8H600

[URL=""][/URL]

new sump pan , part number 1111-02J210

[URL=""][/URL]

New hydro clutch conversion pieces.

[URL=""][/URL]

Ex-marsh tuning head, bc springs , with new ported n1 runners and xcessive intake.

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]
Last edited by sss4me on 2015-04-12 at 02-23-53.
2015-03-16 12:40:07
#3
Awesome post! Did you take all of the photos at once or collectively over the time of acquiring the items?

When do you think it will all be coming together if that has not already been done?
2015-03-16 12:48:45
#4
Mfactory helical diff and 4.78 final drive.

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

not my photo but notice the mirrored gears on the mfactory final drive

[URL=""][/URL]

new bearings and seals. part numbers 38342-8E001 , 38342-8E002 , 38440-D2100AU.

[URL=""][/URL]

The big bearing, P.I.T.A. to get. part number 31408-31x08.

[URL=""][/URL]

welded up the casing.

[URL=""][/URL]

[URL=""][/URL]

as alot know, the prototype diff hit the casing, will we made in fit...

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

stage 2 Action clutch, kelver disc

[URL=""][/URL]

[URL=""][/URL]

new battery holder and battery to make room for the new intake.

[URL=""][/URL]

intake made out of a small piece of this stuff. airaid 90mm.

[URL=""][/URL]

gearbox back together. hydro clutch in.

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]
2015-03-16 12:53:29
#5
Great stash of parts and documentation!!
2015-03-16 13:24:25
#6
spark plugs leads , part number 22440-1N510
[URL=""][/URL]

xcessive thermal spacer

[URL=""][/URL]

solenoid caps ans wiring

[URL=""][/URL]

battery in

[URL=""][/URL]

randon assembly photos

[URL=""][/URL]

ishy johnson scraper

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

removed waxstat and spring, looped the water lines

[URL=""][/URL]

[URL=""][/URL]

old donk out.

[URL=""][/URL]

new one in.

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

e-tuning, arming outputs.

[URL=""][/URL]

[URL=""][/URL]

[URL=""][/URL]

- - - Updated - - -

reserved
Last edited by sss4me on 2015-03-16 at 13-39-14.
2015-03-16 13:25:27
#7
reserved. more to come.

- - - Updated - - -

reserved

- - - Updated - - -

reserved 2
Last edited by sss4me on 2015-03-16 at 13-31-05.
2015-03-16 13:29:41
#8
.,,,
2015-03-16 13:31:26
#9
....
2015-03-16 14:25:29
#10
Sweet, nice to see projects coming together. Enjoy it.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top