ebinkerd's Likes Given

you got me. ive known some of this info for a long time.

But is all this effort to make something else work worth saving a hundred or two? Like what do these alternatives cost?

The price of the p12 cas is high...somewhere between $250-$300 bucks. I like to entertain myself with trying to make solutions for things like this. So for me....it keeps my busy. I dont personally...

1993 Infiniti G20-very LOW miles

If these don't work I think I saw guys trying the same thing with 92-94 Maxima CAS units.. See if I can find that info again.

Dala is correct here. Nismotronic does not need to know your gate pressure. It does not need to know this to do what you want it to. Also it does not need to know manifold pressure and dosnt use...

Your right that honda was not at its full potential!! it should have kept up with you and or be a really close race. my cousin had that same k-series setup he made 215 whp and 190 torque his setup ...

Ah yes, this old concept again...

Anyway, this is nice on paper and looks cute on that diagram but mechanically, this is a nightmare. (Especially for the street driven cars we drive to work and ...

True you do lose a lot of the benefits if using the mechanics of the distributor still. A controller box would be an awesome feature for those who need to stick with an OBD2 capable ecu.

Nice, my B15 auto trans lasted about 3 years or so. Finally lost 1st and R one day after a couple months on a GT28RS at 14psi on a low compression VE-T. Decided to swap to manual.

Trapped 99mph ...

I would replace the crank.

My VE build. ACL, ARP, P&P, SUPERTECH, etc

I looked but dont have the pic anymore(wish I did)...but heres what I did in your dilemma.

Drill a hole in the sensor body from the top(I used 3/16) and screwed a 2" long lag bolt into it so I c...

Lost power? hmm this is with same tune just bolted on or with a retune after the new header.
So what is your setup anyway?
You said you had both gspec pullies,but what about the other mods.
cams?
...

Its about 30 posts and nobody has complained about the price. This community is maturing.

you should look into the nismotronic ecu's man, blows calums shit outta the water..

Just put regular gas in it when you know it's gonna sit? IIRC 30 days is all it takes with non vented tank, 90 days with vented tank for E85 to go bad

Both my previous P10's would lock the doors at random. My wife (a realtor at the time) stopped to plant a "For Sale" sign in a lawn, went to get back in a realized it was locked, keys in, engine ru...

If interested, I have flow numbers for a stock VE head compared to my +1mm valved and mildly ported highport head (it's a RWD head, but very similar if not the same ports). I also have pics of the ...

It is probably the distributor cap seal.

:shoot:

Engine internals?

My VET 9:1 GTX2867r 20psi mostly city has been getting 21-22 MPG (99' P11 205 tires) and the 02' P11 195 tires auto T25BB 8-9psi has been getting 24 MPG mostly city. Both need fine tuning but run o...

yeah adjust the cranking tables till it starts with ease

Obviously the first thing to be done - was cleaning up the mess

http://ost.ebeans.ch/albums/userpics/10005/normal_sr20de_head_stripped_chamber_side_clean.jpg

http://ost.ebeans.ch/albums/userp...