All posts liked by ebinkerd
Thanks for tip.
https://loptbw-sn3301.files.1drv.com/y2pa3GoMu-UoAalVqTXd0C9bNv-h7-oGMuRVE82VtmRd88VqNzb7hy0MkWsPAdpj01RDbC6TXhEnhLjdcQ38qKrQ1xLuvb9pk1uY8axsaw_gn7pCncCQecHM59BZVerVmJECzvkLMnrxu...
How to: Sentra CY13F ZT50A 2009-2012 MP3 Ipod radio install and led color change
This piece of engineering arrived yesterday:
http://i.imgur.com/3qhcX4z.jpg
Time to start programming. I simulated a PWM output, and sampled it back into the microprocessor. You NEED an oscillosco...
You may be 100% correct in all of your other statements, but your hyperbole as bolded is actually weakening and undermining your argument.
Not a single person I have ever read comment on our stock...
Over the last few days...
Upgraded my stock fuel pump to an AEM 320(E85 compatable one) and wired it all up on a dedicated relay and larger wire.
Used a factory connector for the new wires to the r...
Rwd guys would be now able to use FWD ecu's?
Nifty stuff going on here! So far, easily the most impressive development for 2015
Granted I don't live in the salt belt but this tool makes ball joints (and tie rod ends) easy peasy.
https://lh5.googleusercontent.com/-gdfqUUb5IkI/VNgwq6wi11I/AAAAAAAAH4Q/yvWL-S5ZTvk/w957-h539-...
Interested for sure in this product. Thanks for doing the R&D.
You can do that!
1) Click Settings (next to My Profile at the top of the screen)
2) Scroll down to My Settings
3) Click Edit Ignore List
4) Add username
C
if the factory head bolts bottomed out in the block, it would be near impossible to get a proper torque spec unless every single block and bolt is made with the upmost precision and is surgical clean.
Apparently, they feel there is enough thread area to not change. Can't really second guess them since they make fasteners for practically for every motors. If you going to build a wonder engine, th...
This is awesome ebinkerd, great work.
Never mind, I found the difference...
Mazworx SR20 headstud kit ARP2000 material 215,000 to 220,000 PSI - Price: about $200 shipped
ARP SR20 headstud kit 8740 Chrome moly 180,000 to 210,000 P...
I mailed Eagle to ask why they do t have the hole and if I could have it drilled by my engineering shop. This was their reply:
"Ronnie,
We do not have that oil hole because it weakens the ...
Appreciate you doing the leg work on this. Exactly the solution I was hoping to come along for our cars. Definitely set the price point to reward your time and ingenuity
Well the Nemu board came in the mail today. Soldering the board in tomorrow, and going to run the startup calibration that John recommended for me. Wish me luck guys.
what he said... :bigthumbup:
This is awesome great work!
Like I said before, I don't have any issues with MS. To be fair, I don't see the purpose of comparing a product that's been around far longer than another that's been around for only a few years. M...
Also your speaking about pushing the nissan fwd platform above and beyond yet you are speaking down on a product that performs really that was designed specifically for us. Sorry I rather use a pro...
http://static1.wikia.nocookie.net/__cb20131209013558/theamazingworldofgumball/images/0/0e/Wat_zps3c5b202d.jpg
Is Nismotronic considered a reflashed ECU nowadays? :P
Back on topic:
If you are unsur...
Time to bump this thread with new info.
If you install aftermarket block heater, they don't mount to the rear of the engine. They go on the front. There are pros & cons to both types, installing...
That's debatable, considering your running all of this in a chassis that's almost as old!
could a couple of copper washers fix that issue? the guy doing the maxima cas overcame a similar issue with a complex solution (my 2c).
See page2, maxima cas, link below:
http://www.sr20-forum.co...