Storm88000's Likes Given

You must use the same parts stores that I use!:p

Remember feels good and works good are not the same thing. You might think your car is faster or making more power but the truth is its not. On the Dyno my car lost power switching vvl on before 54...

Just in Oregon I know I have seen a handful of white 93's, a couple red ones, 1-2 e-blue, and a few sapphire blue ones. But yes less than 20 locally and cars do survive here well. Most stock NX's ...

Want to go harder? punch holes from the interior structure and then use this tool:

http://www.youtube.com/watch?v=oNS5xQnDoJo

will make it lighter and just as strong, if not stronger

a good place to start would be by logging your max load, and scaling your maps properly.

timing is kinda high, pull a little up top, and she's a little lean unless he's running e85.
and he has a 3 inch after his down pipe, the exhaust gas has already started to cool by then so its not...

2.5" is a pee shooter of an exhaust, that is choking the engine. you have super heated exhaust trying to expand as it exits the turbo into a small pipe which is FURTHER restricted by an immediate 9...

with the amount of compression and some boost laid into the mix, it will significantly impact HP numbers by choking the engine. increase the diameter of the exhaust especially at the turbo outlet s...

I see what's going on here lol...everyone wants to see the results with the N1's. That's understandable though. I'd just feel much more comfortable with the s&r's in there because of the amount of ...

Have to step out of the comfort zone sometimes... If everyone follows footsteps the community paces in circles. Why not try the n1's if you already have them. Post up your findings and if you don...

That bay is ballin Love the CF firewall. No brake booster the list goes on . Stepping up the bar

So a re-covered headliner is "woth" more than an original OEM example, because an original OEM headliner "don't have enough foam"? Just want to be sure I'm understanding this logic correctly.

Priority lane would be nice IMO

what I did

Finally got the first Prothane solid Polyurethane motor mount installed on Raven! Had to air-chisel the inner metal ring out before pressing the Prothane in with a hydraulic press.

https://scont...

Towed it from OKL to TX
[url= URL=http://s147.photobucket.com/user/mickeyser/media/SE-R/20140211_090309.jpg.html][img]http://i147.photobucket.com/albums/r299/mickeyser/SE-R/20140211_090309.jpg[/im...

Check it: http://www.sr20-forum.com/members-rides/44514-suzie-gurl-3.html

Re: Official Sentra SE Thread

http://rcresciphoto.zenfolio.com/img/s8/v74/p1453927004-4.jpg

;)

go to my website for a lot more lol

If you'll recall, my best was a [url= URL=http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/403428_10151017685440100_242532288_n.jpg]13.86s @ 107.15 MPH[/url] running basically 4 psi (although it c...

Awesome, that's pretty close to what my Forester would have run, stock, 13.8 @97. Can't overcome the brick shape to get the MPH up.

That's pretty much the powercurve of the Subi's 2.5L with tiny turbo, instatorque.

I have 5 cars in my driveway, will be a long while before I buy another... Build threads are fun though...

Track day re-cap

^^^ true b13 owner. Extra transmission parts sitting on the floor. Lol I don't miss those days. 6spd ftw.

Busted the SE-R loose this morning for a LONG run to work. First time she's been out in like 3 weeks so we "stretched her legs" a bit. Oh, and if the guy driving the Cavalier westbound on Rt 422 ar...