All posts where se200 has been mentioned by other members.
pegging out my n62 maf, any way around it?!?
I REALLY find it hard to believe it would be a software issue, but hey I have been wrong before. You simply need to make sure that you are uploading the basecode when you open a new file and hit co...
as for the fan information, we will try that out. it threw us cause we haven't had to go that route before and now since the new update it seems nothing we try will make the fan function operable....
try reaching out to se200. very knowledgeable guy in orlando
talk to se200! great guy and does all awesome custom work for more than reasonable price with a quick turn around time
I know this is a old thread but I did the conversion on my car and like se200 said the 94 Altima setup fits perfect with just having to open the hole a little on the top part of the bracket inside ...
I have the exessive plenum, and se200's header. The shaft does leak. But I've pretty much tuned around it.
I believe se200 tried that option as we were thumbing thru things. Im trying to avoid going back to the stock cluster as ive already dissected it but if I must then at some point I will. I was t...
I haven't found anyone I trust in the area.I do my own work if possible because of this. I would probably pay to have more things done if I knew the person turning the wrenches gave a shit about my...
Lol....Kenny it's se200
se200 If I get a motor for free how much am i to spend on the header, also what if that motor is a type r k20 motor that retails for over 3k using the dollar value of motor retail price to header c...
se200 is right. I forgot about the hydro clutch in the 99 g20's. Not se-r/spec v b15 as that would require a more extensive swap even though it is possible. You are looking for the 2000-2001 SE 2....
I was going to say 1.21 gigawatts but I think your response se200 is more helpful!
Sent from my SM-N900V using Tapatalk
Sure but to do it right is going to take some money. What engine management do you have currently?
The sr20ve likes medium to large frame turbos and tubular manifolds. You can use a t2 turbo and m...
Here's what I noticed with the CRAP gear oil - when it's cold, it takes about 20 min for the shifter to feel like it would at 70 degrees. It doesn't want to move the colder it gets; on the other s...
se200 thanks alot man. I am looking at a car thats already swapped to B15 hubs.spindles...this is why I am asking. Just trying to see what I am up against in the future with this setup.
The trans ...
Yeah, I want to get rid of the exhaust pipe that I had bent. The aluminum just looks a lot better IMO. Plus its starting to rust and turn colors on me and its less than 6 months old.
Contact se200 he gets that kinda stuff for us. Or you could use exhuast pipe.
Hahaha, He's very confused I'd say! Those injectors should work as long as there isn't anything wrong with the injector's themselves! Part # comes up as yellow top subie injector which is what all ...
se200 DaveM
This is what he said lol!
"Sr20 uses low independence injectors. These are low independence from a sti. I know that from research. Part Number is 16600aa170"
Thanks se200 i think it has 2 b modified for the rail side & the manifold side bcus it doesnt fit like the 444 does and the end flares out like a little lip. So im figure something out. Thanks bro.
Thanks se200 &@91sentragti-r. I will b looking at it today. But what about where it sits in the manifold?? Is there a special o ring or use the 444 o rings? Do i hve 2 to do something to that side ...