Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Quick Injector Questions

+ Reply To Thread
Posts: 11-16 of 16
2014-04-02 14:51:05
#11
Originally Posted by speedricer
I emailed him to be sure cuz of my confusion and he said this....

"I bought them off ebay. About 6 months ago and the mileage was around 50k they said. I was going to use them but I need high independence injectors. They are all from a sti I bought 4 as a set and I needed a total of 6. And I only found one separate and was looking for 1 more until I found out that it will not work on my setup. I was going to use them on a rb25. I've used a set of sti injectors before on a sr20 and it worked great. I have had the set I used on my sr20 clean and tested and they said they are around 550cc"

See why im confused haha


Ask him if there is a part# or any marking on the injectors identifying them or if he know's exactly what year sti they came off of. But ideally a part# then google that # and see what come's up. Dave

Also how does he know they are low impedance?
2014-04-02 16:13:43
#12
Rb25det use the same injectors as the sr20det, sounds like another confused 240sx owner. I have owned both an sr20 swapped 240sx and rb25 swapped 240sx. Rb25/20 is a junk box the sr20 will support the same hp. Get the part # from the seller and don't believe another word he tells you.lol
2014-04-02 19:29:30
#13
@se200 @DaveM

This is what he said lol!

"Sr20 uses low independence injectors. These are low independence from a sti. I know that from research. Part Number is 16600aa170"
2014-04-02 19:58:17
#14
Originally Posted by speedricer
@se200 @DaveM

This is what he said lol!

"Sr20 uses low independence injectors. These are low independence from a sti. I know that from research. Part Number is 16600aa170"


Hahaha, He's very confused I'd say! Those injectors should work as long as there isn't anything wrong with the injector's themselves! Part # comes up as yellow top subie injector which is what all the guy's using these injectors have. I'd say if he is dumb enough to let them go at a reasonable price then grab them put a multimeter to them confirming there within the proper resistance (around 12ohms), then have them cleaned and flow tested. Good luck, Dave
2014-04-02 20:22:20
#15
Speedo u read into shit too far.. I wouldnt of had you get injectors that you could not simply drop in besides the pigtail obviously..
2014-04-02 20:42:17
#16
Josh i just wanted to make sure i have my knowledge correct in case I answer someone in the future, i dont wana set them on the wrong path.....

@DaveM, screw that dumby and his ass backward auction, i just found brand new ones for 40 a pc, flow, ohm tested to match. From the factory with a 1 year warranty. 555cc nismo Yellow Top Jecs Fuel Injectors 16600 AA170 RR543 Subaru Nissan | eBay
FTW!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top