All posts made by tomas527 that members have liked.
There is no con, and John is always on hand to help.
[url= URL=http://s18.photobucket.com/user/BrAinPaiNt/media/picard-face-palm.gif.html][img]http://i18.photobucket.com/albums/b133/BrAinPaiNt/picard-face-palm.gif[/img][/url]
I just put a slightly longer hose from the fuel filter so it gives some slack, didnt need the zippy tie. The straight fitting works fine for me, was happy to have it.
I just put a slightly longer hose from the fuel filter so it gives some slack, didnt need the zippy tie. The straight fitting works fine for me, was happy to have it.
Miko sells them all the time.
Get a new friction disc(they cost like $50), put the clutch in and move on with life. /
There's a couple in Harrys in Quakertown, PA, if you can not find one closer to you.
Maybe he has fat fingers, and meant to type B15, like he really meant......
Sounds like you popped a spring. All that racing.
Sounds like you popped a spring. All that racing.
Absolutely horrible customer service. :-)
Get it from a vendor here
Sounds like you popped a spring. All that racing.
97% sure its 24mm. Do your self a favor when trying to loosen the top bolt and use a impact gun if you have it, when you crank that bolt hard with a ratchet you may break the hard line n wanna kill...
Ill check tomorrow. But yes preferably go under the car,much faster.
Looks like Lehigh valley mall
If the car gets parted and the hood is in good shape lmk.
http://www.sr20-forum.com/electronics/70830-jb15-sr16ve-ecu-blue-plug-8500rpm-rev-limit.html
[url= URL=http://media.photobucket.com/user/noonie25/media/beating-a-dead-horse.gif.html][img]http://i1015.photobucket.com/albums/af276/noonie25/beating-a-dead-horse.gif[/img][/url]
Its not hard. I do this often and get it done within an hour. Bring your hand tools, extensions, and a breaker bar. If you have an electric impact even better. I basically go to work, remove mounts...
Its not hard. I do this often and get it done within an hour. Bring your hand tools, extensions, and a breaker bar. If you have an electric impact even better. I basically go to work, remove mounts...
326k..engine died a couple of weeks ago. Ran strong until the end.