jimbo_se-r's Likes Received

Well, we're kinda hijacking this thread (heh), but the B13 was only made for 4 years, but G20s were made from '91 - '02. And all G20s had an SR20 in them, as opposed to being a premium part on the...

Higher octane fuel will burn more slowly than lower octane, all else being equal. That is why for higher compression motors, with corresponding higher combustion chamber temps, require a higher oc...

http://www.freesmileys.org/smileys/smiley-forum/bump.gif

For the RWD versions, yes. The FWD is another, sadder, story. For some strange reason, Nissan has this block assembly different between these versions of the motor. The FWD attaches with 3 bolts...

So, you have no strong feelings one way or the other?

http://seafoamsales.com/sea-foam-motor-treatment/

I've used that myself, I've never poured it into the oil, but I've drizzled it into one of the vacuum lines to clean up the intake and injectors a...

So, you have no strong feelings one way or the other?

So, you have no strong feelings one way or the other?

Bah. Anytime I go to the trouble of taking the odometer apart, I move the numbers backwards not forwards.

Glad it's working though! But you may have this again in 9999 miles...

Not sure on these. Last time I got down to that level was 30 years ago with a Honda. LOL Just take your time and don't lose any screws.

If there is a junk yard near you, pay the $2 admission ...

ebinkerd

I understand exactly what you are saying, and I don't disagree with any of that. I've been working with electronics for a few decades. ;) It's not unusual to see various 'grounds' at...

More info needed. Where are you taking your voltage measurements from, the output of the alternator, or at the battery?

Take a look at the image in [url= URL=http://www.sr20-forum.com/road-raci...

I've done the PVC method more than once on various cars to keep the window in position.

If the motor is running as you indicated, then definitely check for anything that would bind the cable. T...

Yeah, I probably should have put a smiley face in my earlier comment. I knew the vote was a year and a half back, and I've only been on the forum for 3 months as of this post. I was just being an...

Welcome to the forum! I'm a LeMons racer as well, and am currently in the middle of a new SE-R build in the Austin area.

Overheating, especially the oil, can be a bit problem with racing these ...

Fantastic meet (and also fantastic meat), glad I got to meet some new folks out there. I really wish those carts had a sliding seat, I never could get my legs comfortable. And yeah, a poor excuse...

I've seen posts from other lists where this has been done. It's often a quick fix, and cheap. I'm not an expert on mounts, but you could probably do this for some of them and be OK, but the motor...

Fantastic meet (and also fantastic meat), glad I got to meet some new folks out there. I really wish those carts had a sliding seat, I never could get my legs comfortable. And yeah, a poor excuse...

It is a beautiful facility and a great track. I've not been out there yet. This is actually a pretty good price for that facility, from what I understand.

I'm probably going to toss a bunch of B13 parts in the car to bring along if anyone is interested. I've got most everything stripped off the car that I won't be using.

If anyone needs a B13 passe...

Yeah, I probably should have put a smiley face in my earlier comment. I knew the vote was a year and a half back, and I've only been on the forum for 3 months as of this post. I was just being an...

Yeah, I probably should have put a smiley face in my earlier comment. I knew the vote was a year and a half back, and I've only been on the forum for 3 months as of this post. I was just being an...

Yeah, I probably should have put a smiley face in my earlier comment. I knew the vote was a year and a half back, and I've only been on the forum for 3 months as of this post. I was just being an...

Yeah, I probably should have put a smiley face in my earlier comment. I knew the vote was a year and a half back, and I've only been on the forum for 3 months as of this post. I was just being an...

I had no idea this was still happening when the thread got cleared. Looks like a decent turn out.