OK, I've got a plan now at least. Will be picking up a set of front B13 struts at the local salvage yard next trip, and will compare against the rears when I pull them off to see what the lengths ...
Well, I'm hoping either this weekend of next to hit the local savage yards looking for an engine, and will be popping valve covers open to inspect, should be an easy matter to check out the cams. ...
I'm there! Any time works for me. BBQ in Lockhart sounds fine, but I'm open to whatever. I've got the whole day set aside for this. Will be driving my B15 Spec-V, so a drive anywhere would be n...
Back in the old days of the SE-R mailing list, this came up. If you want a very firm mount, these will do the trick. But you are going to get a lot of vibration. Most DIY folks go the 3M Window ...
Back in the old days of the SE-R mailing list, this came up. If you want a very firm mount, these will do the trick. But you are going to get a lot of vibration. Most DIY folks go the 3M Window ...
You may have a wiring fault, and not a problem with the alternator. First, make sure that the ground wire is attached to the alternator, there should have been a separate wire that attached to a s...
You may have a wiring fault, and not a problem with the alternator. First, make sure that the ground wire is attached to the alternator, there should have been a separate wire that attached to a s...
Going to second this. Last November I was racing a Toyota at the track, everything seemed fine in the garage, but I got it on the track and once I got on the gas it was bucking harder than a mecha...
Parade laps can definitely be a lot of fun. I was at a race a while back, and heard them announce that the parade laps were going to happen after the testing day shut down at 5pm. I immediately s...
Parade laps can definitely be a lot of fun. I was at a race a while back, and heard them announce that the parade laps were going to happen after the testing day shut down at 5pm. I immediately s...
I came across [url= URL=http://www.newtiburon.com/forums/v6-naturally-aspirated/217279-want-build-custom-exhaust-read-first.html]this thread[/url] over on a Hyundai Tiburon forum, which has some pr...
I don't have a FSM handy to check wiring diagrams, but I know on some cars if the passenger switch is bad, the driver's one won't work, and vice versa. You should be able to unplug the motor and ch...
Parade laps can definitely be a lot of fun. I was at a race a while back, and heard them announce that the parade laps were going to happen after the testing day shut down at 5pm. I immediately s...
Parade laps can definitely be a lot of fun. I was at a race a while back, and heard them announce that the parade laps were going to happen after the testing day shut down at 5pm. I immediately s...
Since this is an alternator wire, I'm not sure that I would solder it as a permanent fix. Running a brand new wire is really what you want to do, go just a bit larger than what was there, and rout...
I dealt with this on a Toyota at the track last year. The problem there was that the alternator output was going straight to the battery, from the battery to the kill switch, and from the kill swi...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top