Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

jimbo_se-r's Likes Received

All posts made by jimbo_se-r that members have liked.

jimbo_se-r's Likes Received
- All posts made by jimbo_se-r that members have liked.
Posts: 51-75 of 156
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: Harvest rainwater for waterinjection?
Post: How much water actually seeps into that hole? If I had w...
How much water actually seeps into that hole? If I had water leaking into the trunk, I'd be wanting to seal that up as it's only going to lead to rust over time.

Now, if there were some purpose...
2016-05-17 19:54
Thread: Asking the impossible .........SR20 in a Spitfire?
Post: You will definitely need the ECU, the injectors are ONLY ...
You will definitely need the ECU, the injectors are ONLY controlled via the ECU, as is the ignition spark via the distributor. No ECU, no engine. You'll also obviously need a wiring harness to ma...
2016-05-09 19:29
Thread: One Wire (self energizing) Alternator?
Post: Ok, the general principal with a 1-wire or self-exciting ...
Ok, the general principal with a 1-wire or self-exciting regulator on the alternator is that it doesn't rely on battery voltage being present in order to energize the coils in order for the alterna...
2016-05-08 02:55
Thread: Radiator fans different between AT and MT G20?
Post: Excellent. Worst case I try that and the fan doesn't spi...
Excellent. Worst case I try that and the fan doesn't spin any faster with these. I've got an ammeter ordered that will let me check current up to 100a, so I should be able to get good numbers onc...
2016-04-29 17:17
Thread: Build an Anti-Lift Kit for the P11 Today
Post: Well, I did find a thread from a guy that posted some goo...
Well, I did find a thread from a guy that posted some good pics... http://www.sr20-forum.com/brakes-suspension/63426-anti-lift-kit.html#post916600

:)

Suspension is still a fuzzy area for me,...
2016-04-27 16:53
Thread: What Did You Do To Your B13 Today?
Post: [url= URL=http://www.sr20-forum.com/members-rides/78580-j...
[url= URL=http://www.sr20-forum.com/members-rides/78580-jim-s-build.html#post1041253]For the first time in 16 years, I turned the ignition key...[/url]
2016-04-24 23:13
Thread: What Did You Do To Your B13 Today?
Post: [url= URL=http://www.sr20-forum.com/members-rides/78580-j...
[url= URL=http://www.sr20-forum.com/members-rides/78580-jim-s-build.html#post1041253]For the first time in 16 years, I turned the ignition key...[/url]
2016-04-24 23:13
Thread: What Did You Do To Your B13 Today?
Post: [url= URL=http://www.sr20-forum.com/members-rides/78580-j...
[url= URL=http://www.sr20-forum.com/members-rides/78580-jim-s-build.html#post1041253]For the first time in 16 years, I turned the ignition key...[/url]
2016-04-24 23:13
Thread: Whare are the symptoms of a bad transmission mount? (AND LESSON LEARNED INSIDE)
Post: I have never seen shit like that happen before. On the p...
I have never seen shit like that happen before. On the plus side, you should hopefully be able to find one at your local salvage yard, probably already on the ground under the car when you get the...
2016-04-15 20:50
2016-04-08 21:16
Thread: Why does my car run like $hit when damp/humid or raining outside?
Post: Also the distributor cap is another common one for damp p...
Also the distributor cap is another common one for damp poor running issues. They crack over the years from the heat, and the cracks let moisture in.
2016-04-13 13:58
Thread: Why does my car run like $hit when damp/humid or raining outside?
Post: Also the distributor cap is another common one for damp p...
Also the distributor cap is another common one for damp poor running issues. They crack over the years from the heat, and the cracks let moisture in.
2016-04-13 13:58
Thread: Why does my car run like $hit when damp/humid or raining outside?
Post: Also the distributor cap is another common one for damp p...
Also the distributor cap is another common one for damp poor running issues. They crack over the years from the heat, and the cracks let moisture in.
2016-04-13 13:58
Thread: Road & Track freelancer working on a B13 SE-R story
Post: I'll just leave this here. https://www.youtube.com/w...
I'll just leave this here.


https://www.youtube.com/watch?v=lWMPm5k9E9g
2016-03-09 21:17
2016-04-08 21:16
2016-04-08 21:16
2016-04-08 21:16
Thread: Lowest air pressure/highest air velocity part of the hood?
Post: Well, like I said, I have a very short commute, so all I ...
Well, like I said, I have a very short commute, so all I saw when I immediately hopped out of the car to take a pic was the two warm spots there forming. The pic looked fairy similar, it just wasn...
2016-03-31 18:02
Thread: fuel pressure regulator effects on cold start
Post: The vacuum line is there to balance out the fuel pressure...
The vacuum line is there to balance out the fuel pressure vs the intake manifold pressure. At idle, there is higher intake manifold pressure than at Wide Open Throttle (for a great read, check out...
2016-03-29 14:58
Thread: Lowest air pressure/highest air velocity part of the hood?
Post: Got my new thermal camera in, the model is the Flir C2 if...
Got my new thermal camera in, the model is the Flir C2 if anyone is interested. I took a pic of the hood of my B15 Sentra last night when I got home. I have a VERY short commute, all of about 5 m...
2016-03-30 14:52
Thread: How fast to process an order?
Post: Hello, and thank you for calling. Your call is very impo...
Hello, and thank you for calling. Your call is very important to us, please stay on the line and continue to hold, your call will be answered in the order received. Calls may be monitored for tra...
2016-03-28 16:07
Thread: How fast to process an order?
Post: Hello, and thank you for calling. Your call is very impo...
Hello, and thank you for calling. Your call is very important to us, please stay on the line and continue to hold, your call will be answered in the order received. Calls may be monitored for tra...
2016-03-28 16:07
Thread: How fast to process an order?
Post: Hello, and thank you for calling. Your call is very impo...
Hello, and thank you for calling. Your call is very important to us, please stay on the line and continue to hold, your call will be answered in the order received. Calls may be monitored for tra...
2016-03-28 16:07
Thread: How fast to process an order?
Post: Hello, and thank you for calling. Your call is very impo...
Hello, and thank you for calling. Your call is very important to us, please stay on the line and continue to hold, your call will be answered in the order received. Calls may be monitored for tra...
2016-03-28 16:07
Thread: How fast to process an order?
Post: Hello, and thank you for calling. Your call is very impo...
Hello, and thank you for calling. Your call is very important to us, please stay on the line and continue to hold, your call will be answered in the order received. Calls may be monitored for tra...
2016-03-28 16:07
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top