All posts made by nismo94tuner that members have liked.
Probably going to bog especially if its a stock b13/b14 trans. Better launch that thing off of the rev limiter. No, I'm not kidding either.
Not saying those specs will not work. Just figured I chime in. I know myself and a lot of others crank them down to 85ft/lbs.
Not saying those specs will not work. Just figured I chime in. I know myself and a lot of others crank them down to 85ft/lbs.
Not saying those specs will not work. Just figured I chime in. I know myself and a lot of others crank them down to 85ft/lbs.
Should have results soon. Trying to press him to get the thing on the dyno but was pushed back due to the tuners workload. This should do just as well if not better than the excessive in my eyes. S...
Looking for someone that would be interested in this. I have one of the first ones produced. We need someone who is willing to tune their car in the northeast. Tuner will be Jamie out of CT so obvi...
We are looking to have the car tuned on stock intake manifold and then again on Performance Plus manifold so we can see max gains. It is the one thing that will be a key selling point to any potent...
Test car died unfortunately. 3 cylinders lost comp. I'd like to find someone in the NE willing to test this. Yes, you will have to pay for a tune but you will get a deal on this mani which I will d...
We are looking to have the car tuned on stock intake manifold and then again on Performance Plus manifold so we can see max gains. It is the one thing that will be a key selling point to any potent...
Test car died unfortunately. 3 cylinders lost comp. I'd like to find someone in the NE willing to test this. Yes, you will have to pay for a tune but you will get a deal on this mani which I will d...
Very cool. That's the pulsar dash, harness, etc? This may tempt me to find a front clip here in the states to do a rhd car.
Come on bro, don't make Jason start sweating so soon. I just got something new to assist with the street. Front end just got refreshend. Just waiting on tie rods and the head and she will be street...
Come on bro, don't make Jason start sweating so soon. I just got something new to assist with the street. Front end just got refreshend. Just waiting on tie rods and the head and she will be street...
^This. If you are paying to bore a block, have it done to 88mm and get as much as you can. Piston cost will be the same either way. Get a set of new Eagle or Manley rods for 320-350$, ACL bearings ...
^This. If you are paying to bore a block, have it done to 88mm and get as much as you can. Piston cost will be the same either way. Get a set of new Eagle or Manley rods for 320-350$, ACL bearings ...
^This. If you are paying to bore a block, have it done to 88mm and get as much as you can. Piston cost will be the same either way. Get a set of new Eagle or Manley rods for 320-350$, ACL bearings ...
I gotta call you this weekend, Rob. Got a few questions. Off to bed for now but thinking I will reserve a room for two nights. Going to try and have the street car there.
My boy Mike ran high 11's in a full weight G20 probably at 3,000lbs. A properly setup B13 on decent amount of smack and slicks will run those times with no weight reduction needed. Just gotta drive...
Lol this guy^!. :rofl: Jose is cool people.
My thoughts on experience:
-Do not attempt to port the head if you or whoever is doing it has experience with the VE and knows what they are doing. Opening up the ports without knowing can lead to...
Squirters, yes. My old SR16 did not have a girdle though.
My thoughts on experience:
-Do not attempt to port the head if you or whoever is doing it has experience with the VE and knows what they are doing. Opening up the ports without knowing can lead to...
My thoughts on experience:
-Do not attempt to port the head if you or whoever is doing it has experience with the VE and knows what they are doing. Opening up the ports without knowing can lead to...
I understand what you guys are saying but this is the level where I tell guys they need to have the stomach for the N/A game with the SR20. Yeah, you can make a cheap 190-200whp VE setup with a 100...
I understand what you guys are saying but this is the level where I tell guys they need to have the stomach for the N/A game with the SR20. Yeah, you can make a cheap 190-200whp VE setup with a 100...