D-Unit121's Likes Given

Open Hardware COP controller

I agree with everything you said. I've got a 1.6 line on my B13 and it's nice and out of the way. No need to ziptie it to the radiator hose in fear of having it touch the manifold.

For sensor ground for proper operation. All metal parts that have electric devices should be grounded to the vehicle body to prevent electrical back feeding which causes really strange issues with...

Dyno #'s really dont prove how well a turbo operates. Data and flow sheets do the talking. You can crank up the boost and say it made more power than a Garrett unit. Compare apples to apples. I hav...

Wastegate rod came off actuator, thanks

Build an Anti-Lift Kit for the P11 Today

123

Thank you to all those who have contributed new information the past few days. This is hugely appreciated! Please keep up the constructive discussion! Don't be hesitant, folks!

Plan changed. It will be in N15 Almera now, which is at the procces of custom 3-4-5 gears and clutch type 1.5way LSD in 70V trans at the moment.

Engine is 20V with custom Tri-Y, exhaust 2.7", Nis...

Also the distributor cap is another common one for damp poor running issues. They crack over the years from the heat, and the cracks let moisture in.

NO MORE NJ DMV Inspection Needed ( 1995 & Older )

Here's the doc on knock that explains how it works: [url= URL=http://www.nismotronic.com/Help/TCSA_IGNITION_TRIMS.html#knock]NismotronicSA Help - Knock[/url]

Cons: Cost

Pros: Everything else


Look up how torque plates work and why they are used. I'm surprised this question is being asked by you M0J0.
Topdog, is that you?

Hey everyone to forum

Without any new information towards the case at hand, this thread will now be locked.

Basically, remember what Mama said......

https://57.media.tumblr.com/7a9220f249a717c85c9348818a4eab18/tu...

Lol, no one mentioned the obvious yet?

DOWELL PINS!

Should be 3 in the flywheel and 2 in the engine/trans I've seen several clutches fail from a missing Dowell pin..

Here's one from a week...

Yellow wire to adc box. That's it.

Here's what I did using the Honda AC tensioner:

[url= URL=http://smg.photobucket.com/user/TRUSE-R/media/9C3C75FF-981A-436C-B611-D5CF2980862C_zpsjfjp82c3.jpg.html][img]http://img.photobucket.com/...

Rk3188 kitkat 4.4.4 hui-FEI units are the same. Anything you can flash the malaysk rom onto will work. So joying, pumpkin, eonon, etc. The only real hardware difference is the screen apparently....

https://youtu.be/FPc6TQoCYJA

I got mine working just now. Requires slight fiddling but it's doable easily.

I'm using an eonon 1312 but it's the same as many other units such as pumpkin. I was able to do this without softwar...

Been on the search for that. No idea in single din fashion.

My theory is the bluetooth stack is incomplete on the head unit side, or there is a device type limitation. If the hardware is present...

Prepping for finals. Project presentation with the head of the Engineering Dept, and maybe the school president. My school is kinda blowing this out of proportions. Looks like they are trying to us...

I tried them once, on my high comp ve. Car spat out out two plugs on the dyno, well the tils. Dropped in some bkr5e and crossed my fingers and she stRted right back up. Car made 216 that night.

...

5th Annual NISFLO Festival - November 29th, 2015