All posts liked by D-Unit121
NismoTronicSA - NEMU2 Updates
using common sense would have avoided all of it earlier as well... using a ruler when building these and this wouldn't have been an issue to begin with.
Nismotronic + Windows 10 = Yes
I believe OP is not talking about ID injectors
It dawned on me this morning I never updated on how my finals went. I received and A on the project and an A in the class. My professor was so impressed he had the dean come down and sit through th...
Well the transmission is almost at 11,000 miles and still going strong. We took it up to a track event with the VET car and it ran a 14.8 quarter mile??? (Pulled a 14.5 on 9psi last time) Was runni...
I got everything in the car. I have Daniel's code on two different gauges from work. For some reason the temp didn't seem to work right and it was probably because I deleted the HZ out for more dis...
Save your money and buy brand New if you know the person then buy them but I wouldn't risk it
Haha, I did the same thing! That's pretty funny. You can also get the other style flex sensor with the Delphi 150 connector without modification.
Quick update on this build. The main flow path tubing was lightly polished, final tack welded, and then finish welded.
Tacked up and ready to burn
http://turbofx.net/wp-content/uploads/2015/04...
Some pics, had a good time. I hope we can do it again soon.
http://i151.photobucket.com/albums/s126/mrserpr/710A45D0-2BC9-4AF5-B318-A5BDC7398203_zpsax4g2rv7.jpg
http://i151.photobucket.com/alb...
D-unit has been helping me alot with the initial testing, kudos to him :)
On todays agenda, we need to get the RC-filter sorted out. D-Unit121 , I need some more values from you!
http://i.imgur....
I like where this is going! :bigthumbup:
update. the aftermarket crap sockets were not making good contact so I fixed that.
The 3rd brake light turned out to be a bent prong on the clip /plug on the harness so it was not making contact.....
Don't forget to add a vulgar, anti-wheel hop message inside the bell housing.
I have never seen a Bosch relay fail unless it is been exposed to too much current. Put a new one in and you should be fine, make sure to use a 30 relay.
The different color Nissan fuses designa...
I'm in for a minimum of 3 skid plates to start with.
jack it up grab the tire and shake it. if you can move it then replace. that is my method and has seemed to work
Yes, all of the V1 boards have a bluetooth port.
The development of the app is actually coming along pretty well.
It will require a bluetooth module to be installed on the NEMU to communicate with the Android device. It will allow you to monit...
I am currently programming, watch this space in 3 hours.