I think that's exactly right. I think it has to do with calculating the TP value which includes VQ number in the calculation. 4v on a b14/b13 maf flows a lot less air than a z32 maf @ 4v.
Five lugs swap done for my car!!!
http://i944.photobucket.com/albums/ad285/b15azn/IMG_30391_zpsed9a5bf2.jpg
http://i944.photobucket.com/albums/ad285/b15azn/Myb13_zps32545b40.jpg
With how bad that wheel is shoved into the fender like that, the control arm must be bent too. The force required to rip an axle joint from its socket means other things got bent up. Remove the whe...
some rainy day pics. :bigthumbup:
[url= URL=http://s1294.photobucket.com/user/alki24/media/20150307_165212_zpsv8rmkiyu.jpg.html][img]http://i1294.photobucket.com/albums/b618/alki24/20150307_165212...
Not yet on the bench.... but I spent a few hours today.... I opened up #3 - "outside the lines" a bit more, and got the splitter a bit narrower, raised the "roof" 4mm over each port to allow a le...
We are now Nismotronic powered. Played around with it a bit this weekend seeing how coil dwell affect idle and low load throttle response. Didnt get very involved though. I am converting now over t...
Took the car to get dynotuned,then swapped my ssac for one of the ebay tri-y for testing...and retuned.
Added N1 cams and retuned again.
Stay tuned for a full writeup and dyno sheets as soon as I...
BAD IDEA!! Did not work.
https://lh3.googleusercontent.com/WDlQyhL0B6W14wJQ2ZeCw59aQNk5KsRRMnzljjRFPJxjfRabFq6Z1lRnNdcMctVfJbY0XJnjjy1597_j-sQiPkXtIRUpfEIDc3d1cFFlxf8iwJ9HF29MU0XnVPt1jNaMBa96b38Mbb...
I got all psyched up to do all this shit on my leaking distributor, bought $30 worth of seals, rings and gaskets at the Nissan dealership. Popped the dizzy off and noticed that all the leaking was ...
Some update:
App works fine. Found and fixed a few wrong value conversion (IAT,ECT,TPS). 30 Status indicators added and works fine. I need to add some values what i not added yet (like inputs, kno...