1fastser's Likes Given

I turned off the cart on the site...which I have pretty much neglected. It needs work!

They are available, but I take orders through PM and email. Right now, I'll be able to start building one ...

Thanks yall!

All finished and ready to ship...onto the next project :D
http://turbofx.net/wp-content/uploads/2015/04/TIG-welded-stainless-Pie-Cut-Turbo-Exhaust.jpg

Finished welding last night. All that's left is flange surfacing, a light porting, and some deburring.

http://turbofx.net/wp-content/uploads/2015/04/TIG-weld-pie-cut-exhaust-5.jpg

More progress pics...almost finished with this build :)

Mocking up the bellmouth portion with a template that i can transfer over to the tubing
http://turbofx.net/wp-content/uploads/2015/04/Bel...

Quick update on this build. The main flow path tubing was lightly polished, final tack welded, and then finish welded.

Tacked up and ready to burn
http://turbofx.net/wp-content/uploads/2015/04...

Found some time to take the roughed out parts and grind them to fit. Afterwards, they received a light polish and cleaning. Then the welder was fired up to tack it all together. Up next is the bell...

Roughed out the pie cuts w/ the bandsaw last night. Next I'll grind all the parts, test fit them, and regrind them as necessary. Once I'm happy with the fitment, the parts will get a light polish, ...

It's been awhile since I made one of these, but I found the parts and have started building another for a forum member :) This is the start of a GTiR bellmouth build that will transition to 3.0" @ ...

I'm working the bender in order to make these one piece. I just eyeballed the angles in the past, but want to make the bends more repeatable. The bender gauges that are being tweaked will help with...

Auto tranny B13's have multi-speed fans, so that probably explains the 4 pin dealie.

C

she has all drivers sdie fans...the passengers side has cutaway for the filler neck and also a different bolt pattern. ...its like 2 left feet!:poke:
I sent her the proper fan for the pass side,an...

Is the owner of this B13 on here?

It's been taking a long time recently to post replies... (30+ seconds)

No. Your ABCD plug is wrong. Look at it like if it was going to connect into your eye, with the clip on top.

Orientation now becomes; in accordance to the picture in the write up(http://www.sr20-f...

You know what would help? Using a measuring tape and posting dimensions of the mounting holes on the radiator. Speculation goes nowhere fast. If you want actual data, use actual tools.

That was the first version which only were a handful were release.


I have a Franklin hybrids in my VZR, Franklin are about 40mins drive for me. Adrian said the same thing to me about shimming,...

It made the car more tractable at moderate speeds, a bit easier to drive, less shifting required. I do not have my foot calibrated yet with stepping on it with authority. Uh....I am currently pro...

Yes. It will. :)

To clarify to others, the build needed a bit more shake-down time. Mark (and entire crew) was insistent on making it 100% right, they flew me home and Mark personally drove the...

Finished a set of P10 and B13 rear arms over the weekend :)

Cut, drilled, and prepped for welding
http://turbofx.net/wp-content/uploads/2015/06/Nissan-Lower-Control-Arm-Fabrication-20150622.jpg...

Finally got a chance to finish up these trans brackets that have been haunting me for months now. Turned out well and the kits are now complete and fully jig'd.

[url= URL=http://s71.photobuck...

zeneffect I apologize. My plate has been pretty full. I'm missing convention this year as well, which is not like me. Mounts are ready to ship. You have a PM.

[url= URL=http://s71.photobucket....

Six Speed Mounts nearly ready!

The striker seems to be used for a wide variety of cars, and it's tough to get a full list since other part numbers are superseded to this one.

I30 96-99
Maxima 96-99
Altima 93-97
Sentra 91-99
200...

Got this in the mail today... One step closer to the peverbial "jiggy with it." I think I will not use that fan though

http://s9.postimg.org/5sq0augmn/image.jpg

Also installed a little shallow 8...

Don't scrape it. Cover seats and rear deck with plastic, spray ammonia(search tearoffguy) on the tint, bake it in the sun, and it peels off.
It can help keep the defroster intact as well.