All posts where blackngreenb14 has mentioned other members
1 |
unijabnx2000 - It is a legit BB Garret Turbo, and you're right, I could go that route, except that I would like to have at least a GT2871R on there and they will only approve the reduction in price...
unijabnx2000 - It is a legit BB Garret Turbo, and you're right, I could go that route, except that I would like to have at least a GT2871R on there and they will only approve the reduction in price...
sss4me - What do you mean?
lynchfourtwenty - Have you used the FX500? I have an ACT Stage 4 now, and I've pretty much loved it, but it's been put through the ringer already. Also, I'm already ...
sss4me - What do you mean?
lynchfourtwenty - Have you used the FX500? I have an ACT Stage 4 now, and I've pretty much loved it, but it's been put through the ringer already. Also, I'm already ...
Thanks for the responses guys!
slyguy700 How much do you want for a set of the 96lbs injectors? Have they been flow tested/matched? Good O-Rings? Might be asking a bit much, but thought I'd ...
The new SA version is out and I had the same experience Lynx did. Set my initial values, flash the ECU, and boom... she fired right up first try on the second or third crank. Pretty sweet.
Well, I was looking for twin scroll b/c I found a sweet deal on a 67 trim turbo/wastegate that I want to get, and majority of the better turbos I've seen and been interested in are twin scroll. If...
lynchfourtwenty, how did this setup work for you? Everything working okay?
JKTUNING or OnTheChip
I looked up my ECU part number, and from what I've found, it's out of a '93 G20. The only ECU diagrams I have found don't list an EGR Temperature sensor pin, but they do l...
JKTUNING or OnTheChip
I looked up my ECU part number, and from what I've found, it's out of a '93 G20. The only ECU diagrams I have found don't list an EGR Temperature sensor pin, but they do l...
Thanks for the list, BenFenner. I knew about the Turbo Trans-Am, but good luck finding one in a junk yard. The Cyclone or Typhoon, maybe.
lynchfourtwenty, I noticed the same thing about the 90...
Thanks for the list, BenFenner. I knew about the Turbo Trans-Am, but good luck finding one in a junk yard. The Cyclone or Typhoon, maybe.
lynchfourtwenty, I noticed the same thing about the 90...
Wow... Either JKTUNING is working his ass off trying to get the software out to us, or he's getting tired of us asking... lol
I'm boned on the dyno tune before IFO, but I'm still looking forwa...
Yeah, the isolator is on the bottom as well as some hose along the spring. I'll back them off of tighten them down with a torque wrench this evening.
ga16eats... No, I'm running KYB AGX struts...
Woot!
Big thanks to JKTUNING, OnTheChip, and everyone else who is involved in this project!
Woot!
Big thanks to JKTUNING, OnTheChip, and everyone else who is involved in this project!
I started playing with that a bit this morning. Just to fix the issue last night, I turned the heater on and adjusted the values in the fuel table around my idle RPM.
Could you tell me how the ...
The UEGO setup is the least of the great things about a NEMU + Nismotronic RT. :)
I'm a software developer myself... Great work from JKTUNING
gomba, Thanks for the link. I've found quite a few designs online for these. It did seem strange that this one would tell you to remove the intake piping to the turbo inlet... I guess it wouldn'...
Wow. You must have just barely read my response at all if you think for one second that I care at all about not being able to use the rwd engine. My response had nothing to do with the thing. I ...
I'm not taking any serious offense. I understand how it goes on forums. Between software development, my Camaro days, and various and as-sundry other things, I've been down the same road.
I had ...
1 |