All posts where Dala has mentioned other members
Lynx 1fastser
Not much to update, ignition is superb! Been running the arduino ignition sequencer for quite some time, works really well on the road, no bugs at high rpm etc.
If you want to go C...
Lynx 1fastser
Not much to update, ignition is superb! Been running the arduino ignition sequencer for quite some time, works really well on the road, no bugs at high rpm etc.
If you want to go C...
The thing next to the AEM unit is the stock power transistor. All it does is amplify the ignition signal. It is designed to be a serviceable component, so they didn't place it inside the ECU.
Y2...
Another day, another test
Today I went to a local garage and borrowed their smog testing machine, instead of heading to the official inspection place.
I tried to lower the ignition map.
-Instead...
Board received, just shot ebinkerd a mail. Will be posting some stuff soon!
Awesome product, just ordered one!
One question, that I think others might benefit from too;
How tall topfeed injectors should be used with this rail? The choices for EV-14 injectors seem to be h...
Big thanks to JKTUNING for getting me a replacement V1 ADC so quickly.
No longer corrupts tunes, car runs perfect again! :bigthumbup:
I'll post some videos/pics as soon as the GPS module shows up (should be sometime this month)
jimbo_se-r , The arduino application can easily be modified to utilize other means of speed measurem...
Thanks, I did some testing yesterday, and found out a shocking thing. I disassembled everything, to replace the 3V lithium battery. When I measured the battery it was at a healthy 3.6V. I then trie...
D-Unit121 Nope. Starting to doubt that it's related to NEMU, since I tried hooking up my arduino flexconverter, and didn't get a signal... I will investigate it more this weekend.
Flexsensor+NEMU1+NEMU2 ADC box not working
Bug: Triggering download with keyboard
Bug: Triggering download with keyboard
Just wanted to end this thread on a more positive note.
I am the new owner of zeneffects mounts, and planning to take them into use the following month. My original plan was to fabricate my own mo...
Just wanted to end this thread on a more positive note.
I am the new owner of zeneffects mounts, and planning to take them into use the following month. My original plan was to fabricate my own mo...
Péter Linszter
I used the app alot the previous summer. I loved being able to see when outputs trigger, helped a lot when I configured the water injection.
I really enjoyed the logging feat...
Limits like this should be listed in the help section! JKTUNING , there's an improvement proposal :)
BenFenner Very interesting Ben, mind sharing a screenshot of said configuration? :)
Yes, old capacitors first needs to be desoldered and the new ones installed and soldered.
You don't have to, but it is a good idea to replace the caps since pushing 20-30 years is hard on them. ...
gumby510 Glad you like it :)
To get the horn working, you probably dont need much. Although, the FSM is very vague about the horn, this is all I found:
http://i.imgur.com/wAK2ZGG.png
Hey pedro666 , did you get this solved yet? I recently had some start/idle issues, that I solved by regrounding the throttle position sensor. It would read the % value just fine in the logs, but wh...
ebinkerd After putting two tanks of E70 thru the system, the LCD shows an ethanol content of 67%, which seems well reasonable.
342Four If I were to make a plug n play kit, I would only include a...
ebinkerd After putting two tanks of E70 thru the system, the LCD shows an ethanol content of 67%, which seems well reasonable.
342Four If I were to make a plug n play kit, I would only include a...
gumby510 Let me know when your EDM package arrives :)
Socius Can probably vouche for me :), hawaiiaNX too :)
gumby510 Let me know when your EDM package arrives :)
Socius Can probably vouche for me :), hawaiiaNX too :)