SR20GTi-R's Likes Received

One of CT's craziest bays: Big props to Rick for stepping outside the box.

http://i.imgur.com/aZF3h.jpg

We are all limited by different factors whether money or geographic location.

There is no way to equally compare anything anymore. Lack of understanding on this forum makes it impossible.

Thi...

Lol...

Lol...

Too much spoon feeding going on, people need to go out and try something new. We get no where because the same few people are spending $ trying while the rest benefit.

Some of the strongest running motors here were sludge monsters.

I would not worry about it unless you are doing a full rebuild.

Yes I have 100's of graphs 184c, E, my cam combos etc.

My results won't help you any. There is plenty of info out there to determine what combo works for your setup.

This forum is tied around...

Too much spoon feeding going on, people need to go out and try something new. We get no where because the same few people are spending $ trying while the rest benefit.

Too much spoon feeding going on, people need to go out and try something new. We get no where because the same few people are spending $ trying while the rest benefit.

Too much spoon feeding going on, people need to go out and try something new. We get no where because the same few people are spending $ trying while the rest benefit.

Too much spoon feeding going on, people need to go out and try something new. We get no where because the same few people are spending $ trying while the rest benefit.

0.009" in & 0.013" ex is what Charles & I have been using for years on Nissan cams.

You will be fine + or - 0.002" from there.

0.009" in & 0.013" ex is what Charles & I have been using for years on Nissan cams.

You will be fine + or - 0.002" from there.

Some of the strongest running motors here were sludge monsters.

I would not worry about it unless you are doing a full rebuild.

0.009" in & 0.013" ex is what Charles & I have been using for years on Nissan cams.

You will be fine + or - 0.002" from there.

0.009" in & 0.013" ex is what Charles & I have been using for years on Nissan cams.

You will be fine + or - 0.002" from there.

Some of the strongest running motors here were sludge monsters.

I would not worry about it unless you are doing a full rebuild.

Some of the strongest running motors here were sludge monsters.

I would not worry about it unless you are doing a full rebuild.

Some of the strongest running motors here were sludge monsters.

I would not worry about it unless you are doing a full rebuild.

Some of the strongest running motors here were sludge monsters.

I would not worry about it unless you are doing a full rebuild.

Without a plenum, no.

Tuning will be a tough task unless you go alpha N.

Another 2L monster.

http://i1148.photobucket.com/albums/o563/jmarsh11/20130202_194523_zps34d08769.jpg

SR20VE valve (in & ex) part #'s

My best time was a 13.3@108 and 2.2 60' with the NA 2.0

Notice the one wheel burn-out in the pics above, 220k vlsd FTW lol

Yup, found it had 5th gear pop out during the cruise the night before.