All posts made by LAM-PARK that members have liked.
[size= SIZE=6][color= COLOR=#FF0000]HOLD THE PRESS[/color][/size]
Let's go further back, to step 0.
Have you tried running the engine with the maf connected to the intake manifold and tur...
Yeah - your screwed on real-estate there. Good luck and those pics answer most of what I didn't know.
That's always one option. erikalizzetalanis - maybe you should consider this to get around your MAF issues.
That's always one option. erikalizzetalanis - maybe you should consider this to get around your MAF issues.
Z32 MAF on an UN-modified N14 ECU - [color= COLOR=#FF0000]Am I the only one seeing a problem here?[/color]
Let's say that a Z32 MAF will allow the same amount of air through that a 54C will - The ...
Lean on boost means ECU is not adding enough fuel for the amount of air that is going through the engine.
So let's think this through - possibilities could be:
1. MAF is not reading all the a...
[size= SIZE=5][color= COLOR=#FF0000][b]BINGO![/b][/color][/size]
Start with a 95-97 ECU and go from there. That should take care of several codes alone.
For future reference, JWT has a Nis...
[size= SIZE=5][color= COLOR=#FF0000][b]BINGO![/b][/color][/size]
Start with a 95-97 ECU and go from there. That should take care of several codes alone.
For future reference, JWT has a Nis...
sunny: Then you will remember what happens to Tokico Shocks....
They become
http://i1274.photobucket.com/albums/y425/LAM-PARK/SR20%20Forum%20Posts/IMG_2772_zpscad6f91e.png
CODE: [FSM Reference from a 99 SR FSM] http://www.nicoclub.com/FSM/Sentra/1999_Sentra_SR/ec.pdf
UPDATED: 6/23/2013
Originally I pulled the code info from a 97 GA by mistake. Then it dawned on me...
CODE: [FSM Reference from a 99 SR FSM] http://www.nicoclub.com/FSM/Sentra/1999_Sentra_SR/ec.pdf
UPDATED: 6/23/2013
Originally I pulled the code info from a 97 GA by mistake. Then it dawned on me...
CODE: [FSM Reference from a 99 SR FSM] http://www.nicoclub.com/FSM/Sentra/1999_Sentra_SR/ec.pdf
UPDATED: 6/23/2013
Originally I pulled the code info from a 97 GA by mistake. Then it dawned on me...
Hopefully it's not a A/T axle in a M/T. That would call for a plasma cutter and a new diff.
Don't ask how I know this...
What fuel pressure regulator are you using?
Which fuel line is your fuel pressure gauge on?
How did you go about setting base fuel pressure?
Is Blow Off Valve Recirculated?
Where is your Z32 MA...
I hate it when so many people just guess and spout out non-sense (not that I'm not occasionally guilty of that). I do my best to put out correct info that I can easily back up via FSM, ESM or FAST...
sunny - Dam, do you remember how crazy we were back then - I remember passing out in the bushes on the strip in Las Vegas or was that LA - either way I can't remember.
Can't wait to see you stat...
Couldn't have said it better. This August I will hit 20 years with the B13's. YES 20 !!! Still have the first one I purchased brand new off the lot and will N-E-V-E-R sell it.
The forum(s) a...
Other than having a part flying around inside you bell housing, what go wrong... Hmm, need I explain?
The Check Engine Light (CEL/MIL) usually will not come back on right away for these ty...
Couldn't have said it better. This August I will hit 20 years with the B13's. YES 20 !!! Still have the first one I purchased brand new off the lot and will N-E-V-E-R sell it.
The forum(s) a...
Or simply put:
1=Intake Manifold Gasket
2=Intake Runner
3=Intake Runner to Intake Plenum Gasket
4=Intake Plenum
P11 - SR20VE
1 - 14035-1N500
2 - 14003-1N500
3 - 14032-1N500
4 - 14010-1...
Google was not able to translate to English. Please try again.
http://www.nicoclub.com/FSM/Sentra/1996/EC.pdf
Couldn't have said it better. This August I will hit 20 years with the B13's. YES 20 !!! Still have the first one I purchased brand new off the lot and will N-E-V-E-R sell it.
The forum(s) a...
Dealer is the only place I have found them.
Part Number: 30506-M8002
[url= URL=http://s1274.photobucket.com/user/LAM-PARK/media/NISSAN%20OEM%20PARTS/30506-M8002/30506-M80021_zps930e7868.jpg.h...