Thread: Suspension Technique rear sway bar B13 - need to fabricate brackets

hi guys. I got my hands on a used ST rear sway bar for the B13. I got all the hardware except for the the brackets that you bolt to the end links and then to the hub. I was wondering if anyone here fabricated their own brackets or still have the original brackets? a pic of the brackets against a ruler would be helpful. I just need the dimensions so I can fabricate my own. Based on the pic, the endlinks seem to be angled and not 90 degrees relative to the bar. That's why I wanted to get the original dimensions of the L brackets. I would appreciate any assistance. Here's a pic (courtesy of sir brooklyn nx)

ST still sells them (the brackets) thou from my recent experience they will only sell as the complete hardware package - If your bushings are done might be worth getting the entire kit.

Thanks for the refrence pic. Wasnt sure how the L brackets should be mounted. The instructions dont illustrate it.

thats another question i had to ask. here's a pic of the bracket mounted the other way from sinister sentra The Sinister Sentra « Mr. Wellwood's Tech Ed Site

now im confused which way to mount it but either way seems to work

IIRC - The left goes in front and right goes behind. Will have to pull the car cover off 1 of my B13's to verify/compare. Will add pics in the next 48 hours.

thanks sir! I've also emailed ST if they can give me the dimensions of the endlink brackets but still no response.

I have k sport coilovers where do connect the endlinks commingafter from the c/o? after installing the st sway?

Google was not able to translate to English. Please try again.

Touch screen with gloves on go figure.
I have endlinks connected to my coilovers(rear). They used to connect to the stock sway bar.Now that ive installed the st sway, where/what do the endlinks connect to now.

It connects to the bracket. The bracket connects to the knuckle where the trailing arm bolts in.