Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

vorin's Likes Given

All posts liked by vorin

vorin's Likes Given
- All posts liked by vorin
Posts: 1-25 of 46
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: 2016 Nissan Sentra Automatic: A disappointingly subpar compact
Post: Way too much unnecessary hate for this car on this articl...
Way too much unnecessary hate for this car on this article. Is not the greatest car in this category but is not the worst. Toyota sells a lot of the new corollas and that car is boring and bland as...
2016-05-20 14:37
2014-09-10 19:14
Thread: Easiest fix for rod knock
Post: Open the bottom end up, and if the bearing shells are sti...
Open the bottom end up, and if the bearing shells are still there, just replace with new ones of the same grade and button it back up. If the bearing shells are missing on any of the rods, either c...
2011-03-27 15:58
Thread: Engine Build
Post: Engine Build
Engine Build
2016-05-20 03:14
Thread: Question about O2 Sensor Reference Voltage
Post: Ah Stock o2 sensor is a narrowband sensor. It will only ...
Ah

Stock o2 sensor is a narrowband sensor. It will only output high/low voltage. It cannot be used to monitor AFR at all. It is only used for closed loop operation, to switch the mixture between r...
2016-04-26 13:30
2016-04-08 12:19
Thread: Hello from Vancouver
Post: Hello from Vancouver
Hello from Vancouver
2016-03-30 12:52
Thread: What Did You Do To Your B13 Today?
Post: I drove it into work for the first time in a long time as...
I drove it into work for the first time in a long time as a little birthday present. Sure the idle is terrible, it smells like gas when you get on it, it rattles your fillings out, and the factory ...
2016-03-29 23:59
Thread: NOOB guide to installing cams in an SR20DE
Post: NOOB guide to installing cams in an SR20DE
NOOB guide to installing cams in an SR20DE
2016-02-13 21:28
Thread: What Did You Do To Your B13 Today?
Post: Went racing at VIR to test out the new upgrades. I had s...
Went racing at VIR to test out the new upgrades. I had set a goal of taking a second off my lap times and exceeded that by going 2 seconds faster with my fastest lap of 2:18. And coming home with...
2016-03-15 02:15
Thread: Road & Track, July 1991 and random scans
Post: Road & Track, July 1991 and random scans
Road & Track, July 1991 and random scans
2014-04-27 03:20
Thread: Road & Track freelancer working on a B13 SE-R story
Post: That is most certainly an SE-R shift boot, the rubber ver...
That is most certainly an SE-R shift boot, the rubber version was what shipped in the first few weeks of production. I posted [url= URL=http://www.sr20-forum.com/classifieds-oem-parts/78244-wts-au...
2016-03-10 15:47
Thread: idle has sucked for years, any way to tune out the iac completely?!?!
Post: You can delete it, but better yet would be to take a few ...
You can delete it, but better yet would be to take a few logs of the issue and post those and your TCD and I am sure we can help get you squared away!
2016-02-26 23:36
Thread: OST-037: Under Pressure
Post: It was a "wash".... the stock valves flowed very close t...
It was a "wash".... the stock valves flowed very close to the Supertech valves in the ported head. They did flow marginally less, but they were close. What I found out when I checked Supertech ...
2016-02-24 17:58
Thread: OST-037: Under Pressure
Post: OMFG...... 2 weeks to get valve seats, and install them....
OMFG...... 2 weeks to get valve seats, and install them...... :banghead:

anyway.... the head is back in my possession, and the new seats has been opened to the size of all the other seats... the...
2016-02-19 23:17
Thread: OST-037: Under Pressure
Post: small bit of explanation.... the above gif was taken fr...
small bit of explanation.... the above gif was taken from a Brit TV show called, "Are You Being Served", comedy about department store employees. The gif is from an episode where that mannequin ...
2016-01-27 22:37
Thread: OST-037: Under Pressure
Post: our specs.... http://ost.ebeans.ch/albums/userpics/10...
our specs....

http://ost.ebeans.ch/albums/userpics/10005/SR20VE_valve_guide_specs.jpg

of course in millimeters - so we must convert

.04mm = .00157"
.073mm = .00287"

So tight guides w...
2015-12-21 19:14
Thread: OST-037: Under Pressure
Post: I had to look this up.... still unsure, unless it is a s...
I had to look this up.... still unsure, unless it is a synonym for cyl volume matching.... but yes, with new valves, and machine work to come, I may need to adjust chamber volumes.

Speaking...
2015-12-05 21:15
Thread: OST-037: Under Pressure
Post: nothing wrong with them.... there was some wear (to be e...
nothing wrong with them.... there was some wear (to be expected)... the new exhaust valve just moves the tolerance back to the middle of the spec


Boy... I'm having a tough time communicating ...
2015-12-02 04:48
Thread: DE head package - on a budget - infotainement
Post: The moss is starting to grow on this thread again... Any ...
The moss is starting to grow on this thread again... Any updates? :bigthumbup:
2016-02-23 18:50
Thread: CNP/COP conversion for OEM ECU
Post: Newest design is rock solid in bench testing. Night and d...
Newest design is rock solid in bench testing. Night and day compared to what I showed for my final presentation. Trying to install this weekend to monitor the cycles, hopefully follow up the weeken...
2016-01-15 03:22
Thread: 2016 National Convention
Post: NJMP's 2016 Event Schedule Schedule is out!
NJMP's 2016 Event Schedule


Schedule is out!
2015-12-15 15:35
Thread: Guide: Building Custom Koni Shorts (CSKs)
Post: Note: for track use, you're going to want the rear rate h...
Note: for track use, you're going to want the rear rate higher than the front. I'm currently 100lbs higher in the rear.

The other thing to remember is that when you lower the car you give up so...
2015-11-22 02:57
Thread: DE head package - on a budget - infotainement
Post: Hi SR20-forum.... apologies for not logging in sooner, th...
Hi SR20-forum.... apologies for not logging in sooner, the CA18 work never materialized, but I've been busy with a number of Toyota heads. Most recently one 20V Silvertop, and one 20V Blacktop......
2015-10-28 21:54
Thread: What Did You Do To Your B13 Today?
Post: Gave her a wash before hibernation [url= URL=http://s171....
Gave her a wash before hibernation
[url= URL=http://s171.photobucket.com/user/omar0138/media/Mobile%20Uploads/IMG_20151011_145454147_HDR_zpsu6n1qled.jpg.html][img]http://i171.photobucket.com/albums...
2015-10-12 19:18
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top