1fastser's Likes Given

Track

Front
2.5-3 degrees negative camber, 1/8 toe out, 3-4
degrees positive caster.

Rear
1.5 degrees negative camber, zero toe

Street

Front
1.5-2 degrees negative camber, zero front toe, 3-4
d...

I might make the drive...won't have any Nissan though, will have to be my 2zz turbo mr2 spyder ;)

I reused the fx500 pressure pate and TOB and installed a new sprung action MS disc....holding up to daiy abuse just fine about 2000 miles so far:bigthumbup: Nice and smooth no chatter and grips goo...

Oh and for all those concerned about it, I sold the NEO to a dsm guy.

The idea for it wasnt really for precise tuning, just a stopgap to control the VVL until I could move on to something more a...

Welcome to the forums! This is great news to hear that your sour tastes just entering into the SR20 world were not hampered, but rather inspired. Welcome to the forum.

Hopefully you can find ti...

New member from Atlanta

Thanks for letting me know! I see what you're talking about when I checked from my brothers computer. That's weird though because the earlier pictures I posted the same way. I'll try to go back thr...

Nissan engines in other vehicles

[img][URL=http://s1378.photobucket.com/user/Lowboostb13/media/IMG_3734_zps0vifzw1c.jpg.html][IMG]http://i1378.photobucket.com/albums/ah118/Lowboostb13/IMG_3734_zps0vifzw1c.jpg[/img][/URL][/IMG]

Pulled the VC....

[url= URL=http://s147.photobucket.com/user/mickeyser/media/20161129_145449.jpg.html][img]http://i147.photobucket.com/albums/r299/mickeyser/20161129_145449.jpg[/img][/url]

Changed out my clutch over the weekend.
http://i265.photobucket.com/albums/ii205/93nx2000/IMG_20161126_130323848_HDR_zpswimv8udi.jpg

Reusing my pressure plate, as it still looked good (just dirty)...

No orders yet. I just finished building a couple of welding tables that will help me build these quicker. Should be able to make some progress this weekend :)

http://turbofx.net/wp-content/uploa...

Worked on these over the weekend by prepping a few of the stabilizer bar parts for welding :)

http://turbofx.net/wp-content/uploads/2016/10/Shift-Linkage-Parts-Prepped-for-Welding.jpg

Cut out a bunch of parts for these last Fri. night...next update will be this weekend.

http://turbofx.net/wp-content/uploads/2016/10/Shift-Linkage-CNC-Plasma.jpg

Gearing up for 11 (1st one for Keo) sets of these...knocked out a few of the stabilizer bar bushing holders earlier this week.

http://turbofx.net/wp-content/uploads/2016/10/IMG_20161003_220259-e...

2016-12-22 Edit: I've prototyped the design below in plastic with a 3D printer and it needed significant changes. The hole dimensions were perfect, but the dog bone shape needed work to clear parts...

Took it apart and notched the trans

[url= URL=http://s147.photobucket.com/user/mickeyser/media/20161118_143018.jpg.html][img]http://i147.photobucket.com/albums/r299/mickeyser/20161118_143018.jpg...

Took the LE-R on one last road trip for the season to Mississippi to pick up some brand new Nitto NT-05 205/50R15 tires that came with B14 SE-R wheels mounted. Averaged 31.6 mpg and 79 mph both wa...

i'm not american.does the motor actually need a egr valve to comply?

if no, could you consider a tunable ecu or standalone ecu, with a smog-complaint tune for emissions, and a performance tune f...

So with the help of Dala, we have been able to confirm the fault at present is from ground loop current. We have since changed the pcb layout and are approaching this with a focus on digital isolat...

The sample we made was for the B13, and had valving for 9K/7K. As we use digressive valving with specialised shims (not your typical linear valving), this increases the spring rate range to within ...

That was for the KA24DE, not an S14 SR20DET.

I did this with my older daughter, now it is her turn. Next in 2 years it will be my sons turn to learn. I do this so can take pride in their car and not entitled to it.

http://i47.photobucket.com/albums/f168/cal269/Nissan%20NX/20161101_183710_zps4zeawxml.jpg

New SR20 girl, changing the control arms.

http://i47.photobucket.com/albums/f168/cal269/Nissan%20NX/20161...

New egg to the family