Boostlee's Likes Given

Most FL guys didnt even GO to ATL ,and I doubt it will be closer than that....so dont hold your breath.
If thats what you really want...MAKE IT HAPPEN.
Just call Rob or Louie and ask whats invol...

Compression difference and also over all air flow. I am sure the new manifold changed that a bunch. Every set up is different so don't let your old set up guide you too much on the new one.

Heh. This upload failed seven times but the eighth attempt worked.

https://dl.dropboxusercontent.com/u/34879635/SR2014/Honda%20Sucks%20Hi%20Stratton.jpg

https://dl.dropboxusercontent.com/u/34879...

Its the caliper body flexing, there's not much can be done.

So is your girly happier now that rusty POS is gone?

It was the stock OEM gasket that was butchered and it left jagged edges twisting up and down making it impossible to seal. It was simply an extremely piss-poor oil pump change is the bottom line.
...

..and I understand more fully now why my hubby won't even look at an 'engine swap' car for a used street car.... too many hacks out there :(

The class was really good, it honestly changed the way I thought about tuning. The biggest takeaway for me was that the way to tune correctly is to make your fuel table reflect what you want in rea...

U say the ve would fit... I hope u mean vet... Cause only the narrow sr20 block will work on the 4wd pulsars due to the transfer case....

No, but it's the same thing I'm going to do to you.....

(For everyone else, that kid bump drafted me until he stuffed it inside on the fastest corner of the circuit....)



You really need t...

First test of the car went well...Tim ran the Mt. Ascutney hillclimb this weekend. The lack of sway bars and the new compliancy of the rear suspension did give a lot more suspension movement than b...

You can see how Tim just spaced out the bottom of the front fenders. No need for bigger front flares this way.

https://farm8.staticflickr.com/7436/13987450158_4aa56f6493_b.jpg


Not the best ...

This past Tuesday I went to Tim's and helped him install the rear spindles with the new monoballs, and we fitted the rear disc brakes.

Earlier in the day I stopped at Hoosier Tire East and purc...

Nothing fancy. It was originally built for track days and then was a rally car for years. It's pretty much bolt ons. Energy Suspension poly bushings throughout. Front strut towers raised 1.5" for m...

Here's the other side of the car. It pretty much went the same, but since the fuel filler was there I was a bit more cautious with the sparks and there was also a bit more rust that had to be atten...

Some more pics of the fabrication and fitment:

https://farm8.staticflickr.com/7321/13977015945_9c539dea19_b.jpg

https://farm6.staticflickr.com/5285/14011215035_8424828b08_b.jpg

https://far...

TRACKFORGED money can make anything happen.

I work with Spec Miatas.......

Due to the lack of time we have currently I need to make moves. At this point they would have to tell me today that we are on. If not tomorrow a decision is made. Tonight I will post all the inf...

I'm all for karting. I'll keep my money in the pot for that. This is all a big bummer, not just for us but for the downfall of Nelson ledges as well. Thank you Rob, Lou and Mark for having to deal ...

Well, if someone were to accidentally open the doors and have a joy ride with 20+ other guys around a track, would that be wrong?

Very tragic. Theres no reason to be street racing ever.

Sent from my SM-N900V using Tapatalk

Nelson Ledges total cost for the full day was $4026 and that was because we were coming back a second time. Pitt Race is double the cost litteraly. As of now we only had 15 people pay and that di...

Reed Kryder

Not the case at all. There's been a bunch of drama there over the last week.