DaveM's Likes Given

started mine for the first time in 6 months

[size= SIZE=4]Windshield is finally on!!![/size]
[url= URL=http://s531.photobucket.com/user/MADTEC/media/PULSAR%20GTI-R/Pulsar%20-%20Exterior/20150123_165108_zpsfuzyaosz.jpg.html][img]http://i531....

Ok so got all the suspension bits back from the powdercoaters.

Here are some pics of the k-member. Sorry about the pics. Didn't realise the phone had a filter set on it.

http://s4.postimg.or...

[url= URL=http://www.quik-latch.com/lexus-IS300-mini-quik-latch-install.html]Pics on a CF hood...[/url]

5 pre-orders will allow me to be able to get all the connectors new and at a decent price that I can do these harnesses for 579.00 or maybe SLIGHTLY lower but not by much. So whoever is ready to go...

Hood vents are done!!
[url= URL=http://s531.photobucket.com/user/MADTEC/media/PULSAR%20GTI-R/Pulsar%20-%20Exterior/IMG_0816_zpsbomifjtg.jpg.html][img]http://i531.photobucket.com/albums/dd354/MADTEC...

Now this is the part that took me a while to figure out. someone else may want to chime in, I have no prior experience. I never did look on the b15 forum for a breakdown, so that could be an option...

So when I dropped the car back down to the ground for a test drive after doing my wheelbearings and whatnot ,the rear caliper on the passengers side blew a piston seal and spewed fluid all over the...

Another thing remember

For a majority of us, Memorial weekend is already either planned far in advanced or we have family we need to spend time with or it's the one time we get have some time to...

Thanks for the kind words.

We strive to provide you guys with a simple, yet powerful solution to tuning these vehicles.

To the OP, if you are planning on tuning the car yourself then you woul...

http://i189.photobucket.com/albums/z84/CattyNancy/Poplar%20Springs%2010-12-08%20Open%20House/DSCN2536.jpg

all new on both sides,wheel bearings,new hubs,ARP extended studs,balljoints,and power steering rack boots.
http://i.imgur.com/VqQ5bAW.jpg

Decided I couldn't have a powdercoated suspension and a shoddy looking chassis. So I stirpped the entire underside of the car from all the suspension, brake lines, fuel hardlines, brackets, fuel t...

I want to apologize in advance for all these damn photo's. But this IS what I did to my NX today. She will be going into hibernation in a couple of weeks until spring. So I gave her a nice wash and...

Most people I know never change their brake fluid! And then they wonder why brake lines rot...

The trick is not what brake fluid to use, but how often to change it. 3x per decade should be what ...

Blacker than black because it's black ya'll!

Correct, It seems dot 4 has a high boiling point, but really, you should use whatever is compatible with your vehicle :)

Got alot to do still,but shes getting there...first wash/wax since paint

http://i.imgur.com/YoNNeWJ.jpg

i need a straight on shot of a b15 that mostly reps what the sr20 powerd b15s look like... other than that im working on the front stuff now

Damn Dave! Have you been racing around lynchfourtwenty 's dirt track in that thing???

Well the cover popped off my projector head light. So I removed the lens to reattach it in a way that it would not come back off. I also decided to put a oem Tsuru grill on the car. The one I had a...

it isn't likely that the fuel would puddle on the port walls, **IF* it were to puddle, it would likely be on the floor... but... because of this "aero" port, if the fuel is going to puddle, it'll p...

https://www.youtube.com/watch?v=u2fNXS8erjA

Can't really see the time though.

http://www.youtube.com/watch?v=jheasWcA-XQ
Another one of the 10.37 pass

Actually, it also happens @ 5500, and the torque falls like a stone! I can therefore assume that the standard ECU isn't going to be used? The head may also be part of the problem as air speed c...