All posts liked by DaveM
Storm88000
Thanks Dave!
I used two different paints by accident. The first being a Matte and the second being Satin. The cans were the same and had the same color cap, I thought I was getting al...
Just to update you all.
My car was recovered on Wednesday and all that was taking was the electronics. Headunit, amps,sub,scan gauge and iPod.
Waiting to hear back from Geico on the repairs...
Mold Production to begin next week if all goes as planned.
Harbor Freight hand pump $7.99... Remove sending unit and have at it. I did this last night to take out some 7 year old gas.
You can use the old pump,just put a piece of hose long enough to go outside the car into a bucket or gas can.
Then run a jumper wire to the battery....and pump away.:D
you are going to be hand pumping. I would just pump the fuel out under the car using the fuel pump. its a short run between the gas tank and the bottom where the rubber line meets the hard line.
Josh i just wanted to make sure i have my knowledge correct in case I answer someone in the future, i dont wana set them on the wrong path.....
DaveM, screw that dumby and his ass backward aucti...
Rb25det use the same injectors as the sr20det, sounds like another confused 240sx owner. I have owned both an sr20 swapped 240sx and rb25 swapped 240sx. Rb25/20 is a junk box the sr20 will support ...
You are welcome and good luck!
Something to keep in mind is that MANY race cars are sold on bill of sale only (no title involved).
Keep in mind the reason for 'no title available' on older cars...
I concur! And thanks to BenFenner for the compilation/merge/edit/photoshop/elbowgrease ...in all your spare time!
Just a suggestion. Get a video camera and tape the lectures, then get another one to videotape the powerpoint as you're talking and send me both to edit into one file, then I'll send it back, and ...
Both Miko and I contacted Seibon and were told to contact Scott @ Fontana Nissan.
I was asked to donate the molds for research and Scott would take over from there.
Didn't make much sense to ...
I just contacted Seibon and had some fine words with these people, Alex being thst person. They originally did not want to make them because some shit ass at one of the dealers in Cali wanted the r...
You can do it with unbolting just the strut, and sway bar leaving the tie rod end and ball joint attached on either side. You just have to figure out the right angle, and bend the cv joint a bit. I...
lucky lucky lol i sold my b13 for ~$200 with the pacesetter header and all that lol it was junked since no one wanted to buy it.. I wish I could come up on another deal like this one.. I have so ma...
Nice! that car will make more if you part out probably triple your profit. I just scored a 96 se-r few weeks ago. Took it home for $460, thing has 103,*** on the clock and has also been sitting. A...
New side project, Can i get your opinions guys!
You might want to try hooking that to the other battery terminal.
odd, ive seen the same thing. after not owning a classic or egg for 5 years now... im looking to get back into the nissan game. but its slim pickings up here in canada:(
I'll tell you this much, the GTiR is the most diffucult to install! That damn bottom nut is enough to make a grown man cry, even with a Gearwrench.
C