All posts liked by DaveM
Forgot this until today..........
http://ost.ebeans.ch/albums/userpics/10005/ost-037.jpg
this head now carries an OST serial number ;)
a slightly different view.... this time from the i...
Hmm, how much room is there from the jam nut to the side of subframe pocket? I'm wondering if I can cut out a wrench that would help adjust them without having to remove them.
They are made...
What Did You Do To Your B13 Today?
Thank you... my client, and I are quite grateful for your efforts
So, when I got up this morning the shop was a "balmy" 28 degrees http://www.webkinzaddictz.com/forums/images/smilies/cold.gif, ...
L33TG20 at Wildhorse Pass West (CW) on 11/8/2015
I've got all the items I need to take care of what I need to address my self.
Greg V is shipping me all the AC and OEM stuff. He emailed on Friday, has the order together but needs to yap at me....
Thanks DaveM, now I see you were just tagging him in. I get it. Perfect thank you.
and weight. Moving the heavy alternator to "in-between" the axles instead of in front of.
nxpartssource
DaveM
canx2k
nissannx
Canada is all one small town right?
-4an for oil feed.. Was using a .035 restrictor (i believe) which is about .8mm I am going to switch to a 1.5mm restrictor because I'm paranoid about clogging the one that's in there.. I know the 1...
Noted. The AFR offset should really never be any more than 1 AFR off in either direction.. optimally it should be under +/- .5.
This is definitely either a ECU ground offset issue or the wrong c...
Finally got the trans on, I ended up unbolting the cross member and let the engine droop all the way down from the passenger mount and it went on pretty smooth..
http://i1317.photobucket.com/album...
Dave, I had other business with canx2k so I went through him. I appreciate the help, and hopefully will be back on the road soon. :bigthumbup:
NismoTronicSA - NEMU2 Updates
No, not the Type OS. There's are two Type ST's, with differences in how close the bend came to the firewall.
C
you can check your codes by going to
Tools > Check Codes then a pop up window will come up, go ahead and hit update DTC list and your codes will pop up.
as far as testing sensors, you c...
you can read the sensor output. if its giving you an expected value, and you can see it moving up and down, then its probably fine.
Excellent that helped a lot. I saw that in a pic in another thread but didnt know where to get it.
I appreciate it!
Shift linkage builds are underway. I started to iron out a few of the details over the weekend to be able to make these in batches.
First step was finalizing the some of the shifter parts that ...
What Did You Do To Your B13 Today?
Got my fog light covers in!
http://i.imgur.com/HWMrD1E.png
Guide: Building Custom Koni Shorts (CSKs)
Nissan dealers up here have never heard of a sr20ve motor.....